电子与信息学报
電子與信息學報
전자여신식학보
JOURNAL OF ELECTRONICS & INFORMATION TECHNOLOGY
2013年
4期
871-876
,共6页
赵志欣%万显荣*%谢锐%柯亨玉
趙誌訢%萬顯榮*%謝銳%柯亨玉
조지흔%만현영*%사예%가형옥
外辐射源雷达%正交频分复用%载波频偏%匹配滤波%杂波抑制%参考信号重构
外輻射源雷達%正交頻分複用%載波頻偏%匹配濾波%雜波抑製%參攷信號重構
외복사원뢰체%정교빈분복용%재파빈편%필배려파%잡파억제%삼고신호중구
Passive radar%OFDM%Carrier Frequency Offset (CFO)%Match filtering%Clutter rejection%Reference signal reconstruction
利用正交频分复用(OFDM)波形外辐射源雷达进行目标跟踪和定位是国内外研究的热点之一.该文首先介绍了OFDM波形外辐射源雷达信号模型及其信号处理的关键技术.在此基础上重点从不同角度仿真研究了载波频偏估计误差对OFDM波形外辐射源雷达探测性能的影响,包括其对匹配滤波后目标参数估计精度的影响,对时域杂波抑制性能影响的定量分析,以及对参考信号重构误码率等方面的影响.仿真结果表明,不同时域杂波抑制算法对载波频偏估计误差要求不同;参考信号重构误码率对时域杂波抑制性能影响较大,对匹配滤波的影响较小.最后基于实测数据验证了分析结果的正确性.
利用正交頻分複用(OFDM)波形外輻射源雷達進行目標跟蹤和定位是國內外研究的熱點之一.該文首先介紹瞭OFDM波形外輻射源雷達信號模型及其信號處理的關鍵技術.在此基礎上重點從不同角度倣真研究瞭載波頻偏估計誤差對OFDM波形外輻射源雷達探測性能的影響,包括其對匹配濾波後目標參數估計精度的影響,對時域雜波抑製性能影響的定量分析,以及對參攷信號重構誤碼率等方麵的影響.倣真結果錶明,不同時域雜波抑製算法對載波頻偏估計誤差要求不同;參攷信號重構誤碼率對時域雜波抑製性能影響較大,對匹配濾波的影響較小.最後基于實測數據驗證瞭分析結果的正確性.
이용정교빈분복용(OFDM)파형외복사원뢰체진행목표근종화정위시국내외연구적열점지일.해문수선개소료OFDM파형외복사원뢰체신호모형급기신호처리적관건기술.재차기출상중점종불동각도방진연구료재파빈편고계오차대OFDM파형외복사원뢰체탐측성능적영향,포괄기대필배려파후목표삼수고계정도적영향,대시역잡파억제성능영향적정량분석,이급대삼고신호중구오마솔등방면적영향.방진결과표명,불동시역잡파억제산법대재파빈편고계오차요구불동;삼고신호중구오마솔대시역잡파억제성능영향교대,대필배려파적영향교소.최후기우실측수거험증료분석결과적정학성.
@@@@Using passive radar with Orthogonal Frequency Division Multiplexing (OFDM) waveform for target track and location is recently a research spot at home and abroad. This paper first introduces the signal model for passive radar with OFDM waveform and key techniques during the signal processing. On that basis, how the estimation error of carrier frequency offset influences the detection performance of this radar is mainly investigated through simulation from different aspects, including the influences on target parameter estimation after match filtering, clutter rejection performance and bit error rate during reference signal reconstruction. The simulation results show that different temporal clutter rejection methods require different estimation accuracy of carrier frequency offset. The reconstruction bit error rate has a great impact on the temporal clutter rejection performance while having a little effect on match filtering. Finally, the analysis results are verified based on the measurement data.