光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2013年
4期
59-64
,共6页
杜佳明%邓召义%黄迪山%姜紫庆%贾建军
杜佳明%鄧召義%黃迪山%薑紫慶%賈建軍
두가명%산소의%황적산%강자경%가건군
平面反射镜%应变电测法%弯曲变形%重构
平麵反射鏡%應變電測法%彎麯變形%重構
평면반사경%응변전측법%만곡변형%중구
plane reflection mirror%strain gauge%bend deformation%reconstruction
本文将介绍高速旋转平面反射镜镜面变形测量.平面反射镜在高速旋转时由于镜体倾斜引起的惯性力矩会使镜体产生弯曲变形,影响成像质量.利用应变电测法,通过导电滑环把镜体旋转时镜面应变片电阻变化信号连接到应变仪.从变形与应变之间的关系,用仿真方法估计镜体等效厚度,数值积分重构镜体弯曲变形.并与有限元计算结果进行对比,验证测量的正确性.研究表明:该方法有效可行,为旋转镜面变形测量提供一种新的思路.
本文將介紹高速鏇轉平麵反射鏡鏡麵變形測量.平麵反射鏡在高速鏇轉時由于鏡體傾斜引起的慣性力矩會使鏡體產生彎麯變形,影響成像質量.利用應變電測法,通過導電滑環把鏡體鏇轉時鏡麵應變片電阻變化信號連接到應變儀.從變形與應變之間的關繫,用倣真方法估計鏡體等效厚度,數值積分重構鏡體彎麯變形.併與有限元計算結果進行對比,驗證測量的正確性.研究錶明:該方法有效可行,為鏇轉鏡麵變形測量提供一種新的思路.
본문장개소고속선전평면반사경경면변형측량.평면반사경재고속선전시유우경체경사인기적관성력구회사경체산생만곡변형,영향성상질량.이용응변전측법,통과도전활배파경체선전시경면응변편전조변화신호련접도응변의.종변형여응변지간적관계,용방진방법고계경체등효후도,수치적분중구경체만곡변형.병여유한원계산결과진행대비,험증측량적정학성.연구표명:해방법유효가행,위선전경면변형측량제공일충신적사로.
@@@@A method of deformation measurement is introduced for a rotating plane reflective mirror with high speed. Since the inertia moment is added by mirror rotating, a bend deflection will appear on the body of plane reflective mirror, which will influence the quality of laser beam capture. With regards to this, strains are measured in the mirror body by strain gauges, and the signals are transferred for data acquisition through a slip ring. Based on the relationship between deformation and strain, the corresponding equivalent thickness of mirror body can be estimated by simulation, and the deformation of mirror body can be reconstructed by digital integration. Compared with the finite element calculation results, the correctness of the measurement is verified. Research experiment shows that the proposed method is successful in the result of measurement, and it gives new clue of the deformation estimation of rotating mirror.