高校化学工程学报
高校化學工程學報
고교화학공정학보
JOURNAL OF CHEMICAL ENGINEERING OF CHINESE UNIVERSITIES
2013年
2期
330-333
,共4页
张进%岳国君%董红星%杨晓光
張進%嶽國君%董紅星%楊曉光
장진%악국군%동홍성%양효광
苯%环己烷%选择性%Othmer-Tobias关联
苯%環己烷%選擇性%Othmer-Tobias關聯
분%배기완%선택성%Othmer-Tobias관련
benzene%cyclohexane%selectivity%Othmer-Tobias correlation
以正丁醇为内标物,用气相色谱测定了苯+环己烷+N,N-二甲基甲酰胺(DMF)+硫氰酸钾(KSCN)四元体系在大气压下,298.15 K和303.15 K时的液液平衡数据.通过平衡数据计算了DMF + KSCN混合萃取剂对苯的选择性系数和分配系数,该混合萃取剂选择性系数范围为1.5~10.3.实验结果表明,选择性系数随着萃余相中苯含量的增大而减小;随着混合溶剂中 KSCN 含量的增加而增大.平衡数据采用 Othmer-Tobias 方程进行关联,计算的 Othmer-Tobias方程的标准偏差为0.05~0.09,相关系数接近于1,说明该关联式可以很好的描述实验数据.鉴于DMF+KSCN混合溶剂表现出较高的选择性,该溶剂可作为一种潜在的萃取剂用于分离苯和环己烷混合物.
以正丁醇為內標物,用氣相色譜測定瞭苯+環己烷+N,N-二甲基甲酰胺(DMF)+硫氰痠鉀(KSCN)四元體繫在大氣壓下,298.15 K和303.15 K時的液液平衡數據.通過平衡數據計算瞭DMF + KSCN混閤萃取劑對苯的選擇性繫數和分配繫數,該混閤萃取劑選擇性繫數範圍為1.5~10.3.實驗結果錶明,選擇性繫數隨著萃餘相中苯含量的增大而減小;隨著混閤溶劑中 KSCN 含量的增加而增大.平衡數據採用 Othmer-Tobias 方程進行關聯,計算的 Othmer-Tobias方程的標準偏差為0.05~0.09,相關繫數接近于1,說明該關聯式可以很好的描述實驗數據.鑒于DMF+KSCN混閤溶劑錶現齣較高的選擇性,該溶劑可作為一種潛在的萃取劑用于分離苯和環己烷混閤物.
이정정순위내표물,용기상색보측정료분+배기완+N,N-이갑기갑선알(DMF)+류청산갑(KSCN)사원체계재대기압하,298.15 K화303.15 K시적액액평형수거.통과평형수거계산료DMF + KSCN혼합췌취제대분적선택성계수화분배계수,해혼합췌취제선택성계수범위위1.5~10.3.실험결과표명,선택성계수수착췌여상중분함량적증대이감소;수착혼합용제중 KSCN 함량적증가이증대.평형수거채용 Othmer-Tobias 방정진행관련,계산적 Othmer-Tobias방정적표준편차위0.05~0.09,상관계수접근우1,설명해관련식가이흔호적묘술실험수거.감우DMF+KSCN혼합용제표현출교고적선택성,해용제가작위일충잠재적췌취제용우분리분화배기완혼합물.
Experimental liquid-liquid equilibrium (LLE) data were measured for system of benzene +cyclohexane + N,N-dimethylformamide (DMF) + potassium thiocyanate (KSCN) at normal atmospheric pressure and (298.15, 303.15) K by using gas chromatography which the n-butyl alcohol was used as internal standard. The selectivity coefficients of DMF+KSCN for benzene ranged from 1.5 to 10.3 in this work. The results reveal that the selectivity coefficients increase with the decreasing of the concentration of benzene in the raffinate, and increase with the increasing content of KSCN in DMF+KSCN mixture. The experimental data were correlated by using the Othmer-Tobias correlation. The Othmer-Tobias model represents the experimental data with sufficient accuracy with the values of correlation factor R2 close to 1.0 and the values of the root mean square error range from 0.05 to 0.09. Considering the high selectivity for benzene, DMF+KSCN may be used as a potential extraction solvent for the separation of benzene and cyclohexane mixtures.