武汉工业学院学报
武漢工業學院學報
무한공업학원학보
JOURNAL OF WUHAN POLYTECHNIC UNIVERSITY
2013年
1期
53-56
,共4页
钛酸盐%光催化剂%水热反应
鈦痠鹽%光催化劑%水熱反應
태산염%광최화제%수열반응
photocatalytic%titanate%hydrothermal reaction
以自制Ti(OH)4、TiO2和NaOH为前驱物,经过超声混合后,通过水热反应法合成了不同Ti/Na比的钛酸钠光催化剂,并采用X-射线粉末衍射(XRD)和紫外-可见漫反射光谱(UV-vis-DRS)分别对合成的样品进行了晶型形貌和光吸收特性的表征并对其进行比较.实验结果表明:由于是水热反应,样品晶型较为复杂,可能在合成过程中形成了水合阳离子,导致它的晶型受到一定的影响.同时水热反应法合成的样品(Na2 Ti3 O7)对光的吸收带位置在337 nm左右.
以自製Ti(OH)4、TiO2和NaOH為前驅物,經過超聲混閤後,通過水熱反應法閤成瞭不同Ti/Na比的鈦痠鈉光催化劑,併採用X-射線粉末衍射(XRD)和紫外-可見漫反射光譜(UV-vis-DRS)分彆對閤成的樣品進行瞭晶型形貌和光吸收特性的錶徵併對其進行比較.實驗結果錶明:由于是水熱反應,樣品晶型較為複雜,可能在閤成過程中形成瞭水閤暘離子,導緻它的晶型受到一定的影響.同時水熱反應法閤成的樣品(Na2 Ti3 O7)對光的吸收帶位置在337 nm左右.
이자제Ti(OH)4、TiO2화NaOH위전구물,경과초성혼합후,통과수열반응법합성료불동Ti/Na비적태산납광최화제,병채용X-사선분말연사(XRD)화자외-가견만반사광보(UV-vis-DRS)분별대합성적양품진행료정형형모화광흡수특성적표정병대기진행비교.실험결과표명:유우시수열반응,양품정형교위복잡,가능재합성과정중형성료수합양리자,도치타적정형수도일정적영향.동시수열반응법합성적양품(Na2 Ti3 O7)대광적흡수대위치재337 nm좌우.
@@@@Ti(OH)4、TiO2 and NaOH as precursor, after ultrasound mixed, through the hydrothermal reaction to synthesize titanate photocatalysts of different Ti/Na ratio.And using X-ray powder diffraction (XRD), UV diffuse reflectance spectroscopy (UV—DRS) to characterize the optical absorption properties and the crystal morphology of the titanate photocatalysts.Comparative experimental results show:As a result of hydrothermal synthesis , the crys-tal form of the samples was very complex .Maybe it formed hydratedcation in the synthetic process , resulting in a certain impact on its crystalline form.And the optical absorption band of samples (Na2 Ti3 O7 )by means of hydro-thermal reaction was about 337 nm.