中国有色金属学报
中國有色金屬學報
중국유색금속학보
THE CHINESE JOURNAL OF NONFERROUS METALS
2013年
1期
44-50
,共7页
陈学海%陈康华%董朋轩%彭国胜%陈送义
陳學海%陳康華%董朋軒%彭國勝%陳送義
진학해%진강화%동붕헌%팽국성%진송의
7085铝合金%热变形参数%显微组织演变%动态再结晶模型
7085鋁閤金%熱變形參數%顯微組織縯變%動態再結晶模型
7085려합금%열변형삼수%현미조직연변%동태재결정모형
7085 aluminum alloy%hot working parameters%microstructure evolution%dynamic recrystallization model
通过等温压缩实验,系统研究热变形参数(变形温度、应变速率及应变量)对7085铝合金热变形组织演变的影响.结果表明:升高变形温度以及降低应变速率,均有利于7085铝合金的动态再结晶发生,导致变形后的7085铝合金位错密度降低,再结晶晶粒尺寸增大;随着应变量的增加,变形后的合金位错密度降低,动态再结晶体积分数增大.采用线性回归方法建立包括峰值应变方程、临界应变方程、动态再结晶动力学方程以及动态再结晶晶粒尺寸方程的7085铝合金动态再结晶模型.
通過等溫壓縮實驗,繫統研究熱變形參數(變形溫度、應變速率及應變量)對7085鋁閤金熱變形組織縯變的影響.結果錶明:升高變形溫度以及降低應變速率,均有利于7085鋁閤金的動態再結晶髮生,導緻變形後的7085鋁閤金位錯密度降低,再結晶晶粒呎吋增大;隨著應變量的增加,變形後的閤金位錯密度降低,動態再結晶體積分數增大.採用線性迴歸方法建立包括峰值應變方程、臨界應變方程、動態再結晶動力學方程以及動態再結晶晶粒呎吋方程的7085鋁閤金動態再結晶模型.
통과등온압축실험,계통연구열변형삼수(변형온도、응변속솔급응변량)대7085려합금열변형조직연변적영향.결과표명:승고변형온도이급강저응변속솔,균유리우7085려합금적동태재결정발생,도치변형후적7085려합금위착밀도강저,재결정정립척촌증대;수착응변량적증가,변형후적합금위착밀도강저,동태재결정체적분수증대.채용선성회귀방법건립포괄봉치응변방정、림계응변방정、동태재결정동역학방정이급동태재결정정립척촌방정적7085려합금동태재결정모형.
The effects of hot working parameters (deformation temperature, strain rate and strain) on the microstructure evolution of 7085 aluminum alloy during compressing were studied systematically by isothermal compressive deformation. The results indicate that both the increase of deformation temperature and the decrease of strain rate are good for dynamic recrystallization, which results in the decrease of the dislocation density of 7085 aluminum alloy and the increase of the recrystallization grains size. With the increase of strain of 7085 aluminum alloy, the dislocation density decreases and the volume fraction of dynamic recrystallization increases. The dynamic recrystallization models of 7085 aluminum alloy, which contain the peak strain equation, critical strain equation, kinetics equation of dynamic recrystallization and grain size equation of dynamic recrystallization, were deduced by the linear regression method.