半球截面轴承套锻件辗轧成形工艺的优化与模拟
반구절면축승투단건전알성형공예적우화여모의
Optimization and Simulation of Rolling Forming Process for the Forging of Hemisphere Cross Section Bearing Sleeve
  • 万方数据
    大型铸锻件 대형주단건
    HEAVY CASTING AND FORGING
    2013年 1期 22-24 ,共3页

    戴玉同%钱喜根%陈洪

    대옥동%전희근%진홍

    轴承套%辗扩%有限元模拟 軸承套%輾擴%有限元模擬
    축승투%전확%유한원모의
    bearing sleeve%rolling%finite element simulation
    本文提出圆柱形芯辊预扩孔+半球截面芯辊辗扩一次成形工艺,并采用DEFORM-3D有限元软件对该工艺进行模拟.结果表明:锻件在辗轧过程中载荷平稳,变形均匀.生产实践证明,采用该工艺可有效提高产品的质量及合格率.
    본문제출원주형심곤예확공+반구절면심곤전확일차성형공예,병채용DEFORM-3D유한원연건대해공예진행모의.결과표명:단건재전알과정중재하평은,변형균균.생산실천증명,채용해공예가유효제고산품적질량급합격솔.
    This paper puts forward the cylindrical roller core reaming and hemisphere section roller core rolling forming process, and using the DEFORM-3D finite element soft to simulate the process, and the results show that the load is smooth and deformation is uniform during rolling .The production practice shows that the quality of the products and the qualified rate are improved effectively by using the process .
    원문보기 원문다운로드 사이트로이동
저자의 최근 논문