电子科技大学学报
電子科技大學學報
전자과기대학학보
JOURNAL OF UNIVERSITY OF ELECTRONIC SCIENCE AND TECHNOLOGY OF CHINA
2013年
1期
75-80
,共6页
瞿成明%时少军%薛树功%许钢
瞿成明%時少軍%薛樹功%許鋼
구성명%시소군%설수공%허강
自适应算法%滞环%感应电机%转矩控制
自適應算法%滯環%感應電機%轉矩控製
자괄응산법%체배%감응전궤%전구공제
adaptive algorithms%hysteresis%induction motors%torque control
传统感应电机直接转矩控制(DTC)系统的滞环控制器为Bang-Bang控制,其滞环容差保持不变,因此低速下被调节的磁链和转矩具有较大脉动.为改善转矩和磁链响应,在传统滞环比较器基础上,提出了一种滞环容差自适应调节控制方法,通过对转矩或磁链误差的当前采样值和历史采样值以及滞环比较历史输出值的综合比较,得到当前滞环输出控制信号,并充分利用零电压矢量和反向电压矢量,达到满意控制效果.仿真结果表明该算法不仅能有效降低定子磁链和转矩脉动,也能够有效降低开关频率,提高了逆变器效率.
傳統感應電機直接轉矩控製(DTC)繫統的滯環控製器為Bang-Bang控製,其滯環容差保持不變,因此低速下被調節的磁鏈和轉矩具有較大脈動.為改善轉矩和磁鏈響應,在傳統滯環比較器基礎上,提齣瞭一種滯環容差自適應調節控製方法,通過對轉矩或磁鏈誤差的噹前採樣值和歷史採樣值以及滯環比較歷史輸齣值的綜閤比較,得到噹前滯環輸齣控製信號,併充分利用零電壓矢量和反嚮電壓矢量,達到滿意控製效果.倣真結果錶明該算法不僅能有效降低定子磁鏈和轉矩脈動,也能夠有效降低開關頻率,提高瞭逆變器效率.
전통감응전궤직접전구공제(DTC)계통적체배공제기위Bang-Bang공제,기체배용차보지불변,인차저속하피조절적자련화전구구유교대맥동.위개선전구화자련향응,재전통체배비교기기출상,제출료일충체배용차자괄응조절공제방법,통과대전구혹자련오차적당전채양치화역사채양치이급체배비교역사수출치적종합비교,득도당전체배수출공제신호,병충분이용령전압시량화반향전압시량,체도만의공제효과.방진결과표명해산법불부능유효강저정자자련화전구맥동,야능구유효강저개관빈솔,제고료역변기효솔.
The bandwidth of the conventional hysteresis controller for the Bang-Bang control is constant in the direct torque control (DTC) systems of induction motors, thus the ripple of the tuned flux and torque is stronger in low speed. In order to improve the torque and flux response, a hysteresis bandwidth adaptive control algorithm is proposed on the basis of conventional hysteresis comparator. By the comprehensive comparison of the current sample value, historical sample value of the torque error or flux linkage error as well as the historical output values of the hysteresis comparator, the current hysteresis control signal is achieved, and the zero voltage vector and the backward voltage vector are used fully to achieve satisfactory control effect. The simulation result shows that the new hysteresis control algorithm can not only effectively reduce the stator flux and torque ripple, but also can effectively reduce the switching frequency, and improve the efficiency of the inverter.