火工品
火工品
화공품
INITIATORS & PYROTECHNICS
2012年
6期
34-36
,共3页
张兴高%师宏心%刘庚冉%武湃%李红欣
張興高%師宏心%劉庚冉%武湃%李紅訢
장흥고%사굉심%류경염%무배%리홍흔
燃烧剂%配方%高能%毁伤
燃燒劑%配方%高能%燬傷
연소제%배방%고능%훼상
Incendiary%Formula%High energy%Damage
为提高燃烧毁伤效能,研究了燃烧温度、燃烧时间、熔渣量随着氧化剂含量和金属粉含量的变化规律,获得了高温燃烧剂配方,即氧化剂三氧化二铁含量为57%、金属粉 A 含量为15%、金属粉 B 含量为20%、粘合剂 C 含量为8%.试验结果表明该配方燃烧温度大于2200℃,有望在难燃目标毁伤上应用.
為提高燃燒燬傷效能,研究瞭燃燒溫度、燃燒時間、鎔渣量隨著氧化劑含量和金屬粉含量的變化規律,穫得瞭高溫燃燒劑配方,即氧化劑三氧化二鐵含量為57%、金屬粉 A 含量為15%、金屬粉 B 含量為20%、粘閤劑 C 含量為8%.試驗結果錶明該配方燃燒溫度大于2200℃,有望在難燃目標燬傷上應用.
위제고연소훼상효능,연구료연소온도、연소시간、용사량수착양화제함량화금속분함량적변화규률,획득료고온연소제배방,즉양화제삼양화이철함량위57%、금속분 A 함량위15%、금속분 B 함량위20%、점합제 C 함량위8%.시험결과표명해배방연소온도대우2200℃,유망재난연목표훼상상응용.
In order to improve the damage effect of incendiary,the laws of combustion temperature, combustion time, sinter amount changing along with the content of oxidant and metal powder were studied, the composition of high energy incendiary was obtained. The formula is composed of oxidant ferric oxide 57%, metal powder A 15%, metal powder B 20%, binder C 8%. The combustion temperature of the incendiary is higher than 2 200℃. It is the promising incendiary used in the damage of apyrous objective.