红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2013年
2期
495-498
,共4页
拜晓锋%尹雷%胡文%师宏立%贺英萍
拜曉鋒%尹雷%鬍文%師宏立%賀英萍
배효봉%윤뢰%호문%사굉립%하영평
亮度增益%重复性%像增强器%色温%荧光屏
亮度增益%重複性%像增彊器%色溫%熒光屏
량도증익%중복성%상증강기%색온%형광병
luminance gain%repetitive characteristic%image intensifier%color temperature%screen
亮度增益是衡量微光像增强器图像增强能力的一个重要技术指标,其直接影响着微光夜视系统的观察效果.为了提高像增强器亮度增益测试的重复性,在给像增强器提供稳定供电的条件下研究了光源色温、光源输出光亮度以及荧光屏发光亮度随时间的变化过程,分析了光源色温和光源输出光亮度对于亮度增益的影响机理以及荧光屏发光亮度对于亮度增益测试的影响过程,确定了光源的预热时间不少于15 min且像增强器的工作时间不少于1 min的结论.实际测试结果表明:当光源充分预热且严格控制像增强器的工作时间时测量得到的像增强器亮度增益的重复性优于3%.
亮度增益是衡量微光像增彊器圖像增彊能力的一箇重要技術指標,其直接影響著微光夜視繫統的觀察效果.為瞭提高像增彊器亮度增益測試的重複性,在給像增彊器提供穩定供電的條件下研究瞭光源色溫、光源輸齣光亮度以及熒光屏髮光亮度隨時間的變化過程,分析瞭光源色溫和光源輸齣光亮度對于亮度增益的影響機理以及熒光屏髮光亮度對于亮度增益測試的影響過程,確定瞭光源的預熱時間不少于15 min且像增彊器的工作時間不少于1 min的結論.實際測試結果錶明:噹光源充分預熱且嚴格控製像增彊器的工作時間時測量得到的像增彊器亮度增益的重複性優于3%.
량도증익시형량미광상증강기도상증강능력적일개중요기술지표,기직접영향착미광야시계통적관찰효과.위료제고상증강기량도증익측시적중복성,재급상증강기제공은정공전적조건하연구료광원색온、광원수출광량도이급형광병발광량도수시간적변화과정,분석료광원색온화광원수출광량도대우량도증익적영향궤리이급형광병발광량도대우량도증익측시적영향과정,학정료광원적예열시간불소우15 min차상증강기적공작시간불소우1 min적결론.실제측시결과표명:당광원충분예열차엄격공제상증강기적공작시간시측량득도적상증강기량도증익적중복성우우3%.
Luminance gain, which was directly affect the image quality of night vision system in low light level condition, was an important technological index to evaluate the ability to amply image light intensity. In order to improve the repetitive characteristic of image intensifier's luminance gain, changing process of light source color temperature, light source output luminance and screen luminance had been studied respectively, theory of light source color temperature, light source output luminance and screen luminance impacting on luminance gain had been analyzed. The conclusion with warming-up of light source should not be less than 15 minutes and work time for image intensifier should not be less than 1 minute had been established. Test result showed that repetitive characteristic of image intensifier was better than 3% when light source had been warmed-up sufficiently and image intensifier's work time was controlled strictly.