林业机械与木工设备
林業機械與木工設備
임업궤계여목공설비
FORESTRY MACHINERY & WOODWORKING EQUIPMENT
2013年
2期
44-46
,共3页
Pro/E%三维建模%C.T.C 红碎茶揉切机%螺旋推进器
Pro/E%三維建模%C.T.C 紅碎茶揉切機%螺鏇推進器
Pro/E%삼유건모%C.T.C 홍쇄다유절궤%라선추진기
Pro/E%3d modeling%crushing tearing curling(C.T.C)machine%screw propeller
采用 Pro/E 三维设计软件,对 C.T.C 红碎茶揉切机各部件三维建模并进行组件装配,然后进行装配后的整机干涉检查.为提高 C.T.C 红碎茶揉切机加工效率及茶叶加工品质,对揉切机的关键部件螺旋推进器进行受力分析,为 C.T.C 红碎茶揉切机设计及优化提供参考.
採用 Pro/E 三維設計軟件,對 C.T.C 紅碎茶揉切機各部件三維建模併進行組件裝配,然後進行裝配後的整機榦涉檢查.為提高 C.T.C 紅碎茶揉切機加工效率及茶葉加工品質,對揉切機的關鍵部件螺鏇推進器進行受力分析,為 C.T.C 紅碎茶揉切機設計及優化提供參攷.
채용 Pro/E 삼유설계연건,대 C.T.C 홍쇄다유절궤각부건삼유건모병진행조건장배,연후진행장배후적정궤간섭검사.위제고 C.T.C 홍쇄다유절궤가공효솔급다협가공품질,대유절궤적관건부건라선추진기진행수력분석,위 C.T.C 홍쇄다유절궤설계급우화제공삼고.
Pro/E 3D design software is used for the three dimensional modeling and component assembly of each part of a chopped red tea crushing tearing curling(C.T.C)machine, and after assembly, interference inspection of the whole machine is conducted. In order to improve the processing efficiency and tea quality of the chopped red tea crushing tearing curling (C.T.C) machine, analysis of the force applied on the screw propeller, a key component of the crushing tearing curling (C.T.C) machine is made, which provides reference for the design and optimization of chopped red tea crushing tearing curling(C.T.C)machines.
