模具工业
模具工業
모구공업
DIE & MOUID INDUSTRY
2013年
2期
11-14
,共4页
郭涛%王小新%李合军%王国琪%张明磊
郭濤%王小新%李閤軍%王國琪%張明磊
곽도%왕소신%리합군%왕국기%장명뢰
沙滩椅%气辅成型%顺序进气%溢料槽%模拟分析
沙灘椅%氣輔成型%順序進氣%溢料槽%模擬分析
사탄의%기보성형%순서진기%일료조%모의분석
beach chair%gas-assisted moulding%sequential inlet%overflow groove%simulation analysis
针对沙滩椅在成型中出现的问题,提出了顺序进气的气辅成型工艺方法,将气针进气量的控制和溢料槽的开闭控制结合起来,同时借助Moldflow软件进行模拟分析和优化,制定了切实可行的成型方案,设置了合理的气辅控制参数,确保一次试模成功.
針對沙灘椅在成型中齣現的問題,提齣瞭順序進氣的氣輔成型工藝方法,將氣針進氣量的控製和溢料槽的開閉控製結閤起來,同時藉助Moldflow軟件進行模擬分析和優化,製定瞭切實可行的成型方案,設置瞭閤理的氣輔控製參數,確保一次試模成功.
침대사탄의재성형중출현적문제,제출료순서진기적기보성형공예방법,장기침진기량적공제화일료조적개폐공제결합기래,동시차조Moldflow연건진행모의분석화우화,제정료절실가행적성형방안,설치료합리적기보공제삼수,학보일차시모성공.
A sequential gas-assisted moulding process was proposed to solve the problems in moulding a beach chair. Based on simulation and optimization by Moldflow, a practica?ble moulding process schedule was made in which inlet with gas pin and open & close of overflow groove were controlled together. The control parameters of the gas-assisted pro?cess were set reasonably to ensure the successful moulding at the first time of tryout.
