农业工程学报
農業工程學報
농업공정학보
2013年
1期
11-17
,共7页
魏宏安%王蒂%连文香%邵世禄%杨小平%黄晓鹏
魏宏安%王蒂%連文香%邵世祿%楊小平%黃曉鵬
위굉안%왕체%련문향%소세록%양소평%황효붕
联合收获机%设计%试验%马铃薯%分级
聯閤收穫機%設計%試驗%馬鈴藷%分級
연합수획궤%설계%시험%마령서%분급
combine harvester%design%experiments%potato%grading%development
针对目前国内条铺式马铃薯挖掘机存在的人工拣拾薯块费工费时、效率低等突出问题,研制了一种44~58.8 kW 拖拉机半悬挂式中型马铃薯联合收获机.该机主要由仿形碎土装置、挖掘装置、土薯分离输送装置、薯秧分离装置、薯块输送、分级、装袋装置、传动系统、液压操纵装置以及机架、地轮等部分组成,幅宽1400 mm,纯工作时间生产率0.3~0.5 hm2/h,可一次完成马铃薯挖掘、土薯分离、茎秆、杂草及地膜分离、薯块输送、分级、装袋等作业,收获过程耗用人工少,显著提高了生产效率.田间收获试验表明:该机对旱地尤其是全覆膜旱地马铃薯的收获质量好,土薯分离、茎秆及地膜分离良好,损失率、伤薯率、含杂率分别小于1.38%、4.2%和3.42%.适用于土质松软、无板结的旱地(覆膜)种植马铃薯的联合收获.
針對目前國內條鋪式馬鈴藷挖掘機存在的人工揀拾藷塊費工費時、效率低等突齣問題,研製瞭一種44~58.8 kW 拖拉機半懸掛式中型馬鈴藷聯閤收穫機.該機主要由倣形碎土裝置、挖掘裝置、土藷分離輸送裝置、藷秧分離裝置、藷塊輸送、分級、裝袋裝置、傳動繫統、液壓操縱裝置以及機架、地輪等部分組成,幅寬1400 mm,純工作時間生產率0.3~0.5 hm2/h,可一次完成馬鈴藷挖掘、土藷分離、莖稈、雜草及地膜分離、藷塊輸送、分級、裝袋等作業,收穫過程耗用人工少,顯著提高瞭生產效率.田間收穫試驗錶明:該機對旱地尤其是全覆膜旱地馬鈴藷的收穫質量好,土藷分離、莖稈及地膜分離良好,損失率、傷藷率、含雜率分彆小于1.38%、4.2%和3.42%.適用于土質鬆軟、無闆結的旱地(覆膜)種植馬鈴藷的聯閤收穫.
침대목전국내조포식마령서알굴궤존재적인공간습서괴비공비시、효솔저등돌출문제,연제료일충44~58.8 kW 타랍궤반현괘식중형마령서연합수획궤.해궤주요유방형쇄토장치、알굴장치、토서분리수송장치、서앙분리장치、서괴수송、분급、장대장치、전동계통、액압조종장치이급궤가、지륜등부분조성,폭관1400 mm,순공작시간생산솔0.3~0.5 hm2/h,가일차완성마령서알굴、토서분리、경간、잡초급지막분리、서괴수송、분급、장대등작업,수획과정모용인공소,현저제고료생산효솔.전간수획시험표명:해궤대한지우기시전복막한지마령서적수획질량호,토서분리、경간급지막분리량호,손실솔、상서솔、함잡솔분별소우1.38%、4.2%화3.42%.괄용우토질송연、무판결적한지(복막)충식마령서적연합수획.
In order to solve the inadaptation problems of unsuitability to small plots for present side output-type and container-type potato combine harvesters, and time-consuming, tedious, and inefficient process in manual picking up of potatoes for traditional potato diggers, a new type midsize potato combine harvester was developed with semi-mounted on a 44-58.8 kW tractor. It consists of profiling soil-breaking device, excavating mechanism, soil-potato separating and conveying equipment, stalk separating device, potato transport, grading, collecting, and bagging devices, driven system, hydraulic control device, rack and wheel, etc. The working width is 1 400 mm, and the working productivity is 0.3-0.5 hm2/h. The potato harvester enables a one-stop achievement of potato digging, soil-potato separating, stalk removing, potato conveying, grading, collecting, and bagging procedures. It effectively decreases the labor cost, simplifies the commodity potato processing links, and enhances the production efficiency. The designed split-type and three-order plane digging shovel improves the ability of burying and breaking soil. The digging depth can be adjusted by the profiling soil-breaking roll, which reduces the vertical load of rack. The profiling soil-breaking device and the excavation equipment assembly are connected with the rack through the parallel four-bar mechanism, and their movements are controlled by tractor hydraulic output, which can keep the potato harvester longitudinally at level status and keep the digging shovel with same burying performance in different digging depth. The stalk separation device has a compact structure and good working reliability. The harvest tests on the four types of potato planting fields, as mulching and bed planting irrigable land, fully-mulching and bed planting dry land, parallel sowing dry land, and bed planting dry land, were conducted. The results show that the developed harvester exhibits better performances and adaptation on the dry land potato harvest, especially for fully-mulching dry land. It shows excellent performances for soil-potato separation, also stalk and mulch separation. The productivity achieves 0.4 hm2/h. The loss rate, potato damage rate, and impurity rate are less than 1.38%, 4.2%, and 3.42%, respectively. However, the harvester gives the relatively poor harvest performance and adaptation on the bed planting irrigable land, and displays the high impurity rate.