农业工程学报
農業工程學報
농업공정학보
2013年
3期
115-123
,共9页
蒋坤云%陈丽华%盖小刚%杨苑君
蔣坤雲%陳麗華%蓋小剛%楊苑君
장곤운%진려화%개소강%양원군
抗拉特性%微观结构%纤维%水土保持%阔叶树种根系
抗拉特性%微觀結構%纖維%水土保持%闊葉樹種根繫
항랍특성%미관결구%섬유%수토보지%활협수충근계
tensile properties%microstructure%fibers%water conservation%broadleaf Plant’s roots
为了研究乔木单根抗拉性能与其微观结构和纤维的关系,为筛选合适的水土保持、边坡防护树种提供理论基础,对白桦、榆树、蒙古栎3种北方常见阔叶树种的根系进行了抗拉力、抗拉强度、根系解剖结构以及根系分子离析等一系列的试验,并运用多元回归的方法对两者之间的关系进行定量的分析.试验结果表明:3种阔叶树种的根系显微结构基本和其树材相同;根系显微结构中木纤维所占根系横截面积的百分比、韧皮部所占根系横截面积的百分比、木纤维的尺寸因素影响单根的抗拉特性;其中木纤维所占根系横截面积的百分比对单根抗拉力的影响因子最大且呈正相关,韧皮部所占根系横截面积的百分比对单根抗拉强度的影响因子最大且呈正相关;同时单根抗拉特性与木纤维的长度、木纤维的长宽比以及壁腔比均成正相关,但影响因子小于木纤维所占根系横截面积的百分比、韧皮部所占根系横截面积的百分比;3个树种中榆树在相同直径下的各项测定指标都高于白桦和蒙古栎,表现出单根具有更好的抗拉特性.研究结果可为固土护坡阔叶树种的选择提供参考.
為瞭研究喬木單根抗拉性能與其微觀結構和纖維的關繫,為篩選閤適的水土保持、邊坡防護樹種提供理論基礎,對白樺、榆樹、矇古櫟3種北方常見闊葉樹種的根繫進行瞭抗拉力、抗拉彊度、根繫解剖結構以及根繫分子離析等一繫列的試驗,併運用多元迴歸的方法對兩者之間的關繫進行定量的分析.試驗結果錶明:3種闊葉樹種的根繫顯微結構基本和其樹材相同;根繫顯微結構中木纖維所佔根繫橫截麵積的百分比、韌皮部所佔根繫橫截麵積的百分比、木纖維的呎吋因素影響單根的抗拉特性;其中木纖維所佔根繫橫截麵積的百分比對單根抗拉力的影響因子最大且呈正相關,韌皮部所佔根繫橫截麵積的百分比對單根抗拉彊度的影響因子最大且呈正相關;同時單根抗拉特性與木纖維的長度、木纖維的長寬比以及壁腔比均成正相關,但影響因子小于木纖維所佔根繫橫截麵積的百分比、韌皮部所佔根繫橫截麵積的百分比;3箇樹種中榆樹在相同直徑下的各項測定指標都高于白樺和矇古櫟,錶現齣單根具有更好的抗拉特性.研究結果可為固土護坡闊葉樹種的選擇提供參攷.
위료연구교목단근항랍성능여기미관결구화섬유적관계,위사선합괄적수토보지、변파방호수충제공이론기출,대백화、유수、몽고력3충북방상견활협수충적근계진행료항랍력、항랍강도、근계해부결구이급근계분자리석등일계렬적시험,병운용다원회귀적방법대량자지간적관계진행정량적분석.시험결과표명:3충활협수충적근계현미결구기본화기수재상동;근계현미결구중목섬유소점근계횡절면적적백분비、인피부소점근계횡절면적적백분비、목섬유적척촌인소영향단근적항랍특성;기중목섬유소점근계횡절면적적백분비대단근항랍력적영향인자최대차정정상관,인피부소점근계횡절면적적백분비대단근항랍강도적영향인자최대차정정상관;동시단근항랍특성여목섬유적장도、목섬유적장관비이급벽강비균성정상관,단영향인자소우목섬유소점근계횡절면적적백분비、인피부소점근계횡절면적적백분비;3개수충중유수재상동직경하적각항측정지표도고우백화화몽고력,표현출단근구유경호적항랍특성.연구결과가위고토호파활협수충적선택제공삼고.
Forest vegetation is known to increase slope stability by reinforcing soil shear resistance, and root tensile properties are important factors to consider when choosing suitable species for reinforcing soil on an unstable slope. The macroscopic properties are determined by the microscopic structure; as a result, the microscopic structure of roots needs to be further observed to help us understand the relationship between the soil’s mechanical properties and the microstructure of roots. We chose three common broadleaf species (Betula platyphylla, Quercus mongolica, Ulmus pumila) in North China and carried out several experiments, including single-root tensile tests, root anatomical-structure tests, and wood-fiber segregation experiments. To analyze data from those experiments, we used multiple regression and analysis of variance (ANOVA) in order to determine the relationship between root tensile properties and selected anatomical structure. Results showed that in all species a significant power relationship existed between tensile properties and root diameter (R2>0.8). The root tensile force increased with increasing root diameter, but root tensile strength increased with decreasing root diameter. According to the results of root tensile tests, we found that Ulmus pumila was the most resistant to failure, followed by Betula platyphylla and Quercus mongolica. Through the observation of microscopic sections, the root anatomical features of three kinds of broadleaf species were the same as those of their trunk, and wood fiber was the main anatomical feature in the root. According to the multiple regression models, the area percentage of wood fiber in the root cross-section (short for the area percentage of wood fiber), the area percentage of phloem in root cross section (short for the area percentage of phloem), and fiber dimensions affected single roots’tensile properties. The percentage of wood fiber area was the most important impact factor on root tensile force, exhibiting positive correlation. The percentage of phloem area had the biggest influence on root tensile strength. Wood fiber length, the length-width ratio of wood fiber, and the ratio of cell wall to cell cavity also affected tensile properties, but their quantitative influence was less than other factors. Although the area percentage of phloem affected root tensile strength, within a given species there was no significant difference in different root diameter. From the measurement of wood fiber in roots, we found that wood fiber size and type were different in the three selected species. The quantity of wood fiber increased with increasing root diameter, but the size of wood fiber varied only slightly. In three different broadleaf species’roots, the related index (including the percentage of wood fiber area, the percentage of phloem area, and the fiber dimensions) of Ulmus pumila was higher than that of Betula platyphylla and Quercus mongolica in the same diameter; that is to say, Ulmus pumila had better tensile properties than the other species. In accordance with the root anatomical features, fiber dimension, and tensile properties, Ulmus pumila, the roots of which have a better ability to reinforce soil on unstable slopes, is an appropriate broadleaf species for soil and water conservation.