电力系统保护与控制
電力繫統保護與控製
전력계통보호여공제
POWER SYSTM PROTECTION AND CONTROL
2013年
3期
61-65
,共5页
汪思满%周小波%唐治国%康丰
汪思滿%週小波%唐治國%康豐
왕사만%주소파%당치국%강봉
母线保护%采样值差动%电子式互感器%同步%智能变电站%合并单元
母線保護%採樣值差動%電子式互感器%同步%智能變電站%閤併單元
모선보호%채양치차동%전자식호감기%동보%지능변전참%합병단원
busbar protection%sampling value differential protection%electronic instrument transformer%synchronization%smart substation%merging unit
采用电子式互感器母线保护的可靠性依赖于采样值同步,论述了目前智能变电站中母线保护采用的采样值同步方案.在同步标异常时,研究了合并单元自由采样的非精确同步方法及母线保护可以实现的最大同步误差,针对电子式互感器的应用,提出了优化母线保护原理和调整采样值差动关键参数的思路,分析最大同步误差对采样值差动原理母线保护的影响.在同步标正常和异常之间自适应切换同步方法和调整采样值差动保护原理及关键参数,保证母线保护采样值差动的选择性和可靠性要求,通过仿真分析了非精确同步时的动作行为.采用浮动门槛的方法,避免最大同步误差引起的不平衡电流越限闭锁,最终达到在同步标异常时母线差动保护不退出运行,提高了母线保护在智能变电站中应用的适应能力.
採用電子式互感器母線保護的可靠性依賴于採樣值同步,論述瞭目前智能變電站中母線保護採用的採樣值同步方案.在同步標異常時,研究瞭閤併單元自由採樣的非精確同步方法及母線保護可以實現的最大同步誤差,針對電子式互感器的應用,提齣瞭優化母線保護原理和調整採樣值差動關鍵參數的思路,分析最大同步誤差對採樣值差動原理母線保護的影響.在同步標正常和異常之間自適應切換同步方法和調整採樣值差動保護原理及關鍵參數,保證母線保護採樣值差動的選擇性和可靠性要求,通過倣真分析瞭非精確同步時的動作行為.採用浮動門檻的方法,避免最大同步誤差引起的不平衡電流越限閉鎖,最終達到在同步標異常時母線差動保護不退齣運行,提高瞭母線保護在智能變電站中應用的適應能力.
채용전자식호감기모선보호적가고성의뢰우채양치동보,논술료목전지능변전참중모선보호채용적채양치동보방안.재동보표이상시,연구료합병단원자유채양적비정학동보방법급모선보호가이실현적최대동보오차,침대전자식호감기적응용,제출료우화모선보호원리화조정채양치차동관건삼수적사로,분석최대동보오차대채양치차동원리모선보호적영향.재동보표정상화이상지간자괄응절환동보방법화조정채양치차동보호원리급관건삼수,보증모선보호채양치차동적선택성화가고성요구,통과방진분석료비정학동보시적동작행위.채용부동문함적방법,피면최대동보오차인기적불평형전류월한폐쇄,최종체도재동보표이상시모선차동보호불퇴출운행,제고료모선보호재지능변전참중응용적괄응능력.
The reliability of busbar protection adopting electronic transformer relies on the synchronization of sampling values. The sampling value synchronization method used for smart substation busbar protection currently is discussed. An optimized busbar protection theory, that is adaptive switch over synchronization between normal and abnormal and adjustment sampling differential value key parameter method is established to analyze the influence caused by maximum synchronization error in conditions of using electronic transfers, in order to assure selectiveness and reliability. A non-accurate synchronization for sampling in merging unit method is analyzed and simulated in abnormal synchronization conditions. Floating threshold is carried to avoid unbalance current threshold-crossing block and enhance adaptiveness of busbar protection.