CAJ | 학술논문

介绍一种精轧机组活套非测量快速标定的方法及专用装置,通过在不同机架内某一个非磨损位置作为基准点,采用同一个活套标定块对精轧各架活套装置标定不同数值,以完成标定过程.该方法可减少标定活套时间及成本.能够在正常轧制中进行活套角度标定和校验.
개소일충정알궤조활투비측량쾌속표정적방법급전용장치,통과재불동궤가내모일개비마손위치작위기준점,채용동일개활투표정괴대정알각가활투장치표정불동수치,이완성표정과정.해방법가감소표정활투시간급성본.능구재정상알제중진행활투각도표정화교험.
A method and special device are used to mark the reference at the non-measureing side of finish mill loopers by using a non-wear position as reference point in different stands. A same reference marking block is used to mark the reference on the loopers of a finish mill to finish the whole marking process. This method can reduce the time and cost for the reference marking on loopers and can perform reference marking and checking during the normal operation of finish mills.