中国有色金属学报
中國有色金屬學報
중국유색금속학보
THE CHINESE JOURNAL OF NONFERROUS METALS
2012年
11期
3107-3112
,共6页
钨纤维%溶胶?凝胶%CeO2涂层%涂覆工艺
鎢纖維%溶膠?凝膠%CeO2塗層%塗覆工藝
오섬유%용효?응효%CeO2도층%도복공예
tungsten fiber%sol-gel method%CeO2 coating%coating process
以硝酸铈作为原料,采用溶胶?凝胶法对预处理后的钨纤维进行CeO2涂覆改性,探讨Ce溶胶的制备工艺,研究溶胶特性、煅烧温度、升温速度以及涂覆层数对涂覆效果的影响.采用红外光谱(FT-IR)分析Ce溶胶的特征基团,X射线衍射(XRD)分析Ce凝胶煅烧后的物相组成,扫描电镜(SEM)分析CeO2涂层纤维的微观形貌,电子能谱仪(EDS)分析涂层纤维的物质组成.结果表明:溶胶制备中加入二甲基乙酰胺(DMAC)可提高溶胶稳定性,有利于钨纤维的涂覆改性;在真空气氛中,采用1℃/m in的升温速度并在600℃煅烧2 h的一次涂覆工艺,制备了均
以硝痠鈰作為原料,採用溶膠?凝膠法對預處理後的鎢纖維進行CeO2塗覆改性,探討Ce溶膠的製備工藝,研究溶膠特性、煅燒溫度、升溫速度以及塗覆層數對塗覆效果的影響.採用紅外光譜(FT-IR)分析Ce溶膠的特徵基糰,X射線衍射(XRD)分析Ce凝膠煅燒後的物相組成,掃描電鏡(SEM)分析CeO2塗層纖維的微觀形貌,電子能譜儀(EDS)分析塗層纖維的物質組成.結果錶明:溶膠製備中加入二甲基乙酰胺(DMAC)可提高溶膠穩定性,有利于鎢纖維的塗覆改性;在真空氣氛中,採用1℃/m in的升溫速度併在600℃煅燒2 h的一次塗覆工藝,製備瞭均
이초산시작위원료,채용용효?응효법대예처리후적오섬유진행CeO2도복개성,탐토Ce용효적제비공예,연구용효특성、단소온도、승온속도이급도복층수대도복효과적영향.채용홍외광보(FT-IR)분석Ce용효적특정기단,X사선연사(XRD)분석Ce응효단소후적물상조성,소묘전경(SEM)분석CeO2도층섬유적미관형모,전자능보의(EDS)분석도층섬유적물질조성.결과표명:용효제비중가입이갑기을선알(DMAC)가제고용효은정성,유리우오섬유적도복개성;재진공기분중,채용1℃/m in적승온속도병재600℃단소2 h적일차도복공예,제비료균
Taking the cerium nitrate as raw material, CeO2 coating on the pretreated tungsten fiber was fabricated by sol-gel method. The preparation process of Ce sol was explored, and coating effects were studied systematically via variable conditions, such as sol characteristics, calcination temperature, heating rate and coating layers. The characteristic functional groups of the sol were analyzed by FT-IR, the phase composition of Ce gel after calcining was analyzed by XRD, the microstructure and composition of the CeO2 coated tungsten fibers were characterized by SEM and EDS, respectively. The results show that, during the sol preparation, DMAC addition can enhance the stability of the sol and improve the effect of CeO2 coating on tungsten fiber. The uniform, dense and complete CeO2 coating can be obtained after being coated only once under the conditions of calcining at 600 ℃ for 2 h and heating rate of 1 ℃/m in in the vacuum atmosphere.