CAJ | 학술논문

汽车手工包边模设计是指汽车在试制阶段为了降低成本并提高手工包边的效率和质量而进行的包边模设计,用于小批量的试制阶段车型门盖的包边.在汽车试制阶段,需要进行的手工包边的门盖数量少则十几套,多则上百套,采用纯手工包边效率低,质量也不高,而采用自动包边机包边效率高、质量好,但是成本太高,不利于降低汽车产品的开发成本.因此,文章提出采用纯手工包边模式和自动包边机模式相结合的方式进行手工包边模设计,以达到较高的包边效率及质量.
기차수공포변모설계시지기차재시제계단위료강저성본병제고수공포변적효솔화질량이진행적포변모설계,용우소비량적시제계단차형문개적포변.재기차시제계단,수요진행적수공포변적문개수량소칙십궤투,다칙상백투,채용순수공포변효솔저,질량야불고,이채용자동포변궤포변효솔고、질량호,단시성본태고,불리우강저기차산품적개발성본.인차,문장제출채용순수공포변모식화자동포변궤모식상결합적방식진행수공포변모설계,이체도교고적포변효솔급질량.
Auto manual flanging die design refers to the car in the trial stage in order to reduce the cost and improve the efficiency and quality of manual wrapping of flanging die design, used for small batch trial stage vehicle door cover wrapping. In the automobile trial-manufacture stage, the need for manual edge door cover number at least 10 sets, while more than 100 sets, use pure manual binding, but its efficiency is low, and quality is not high. Meanwhile, the use of automatic wrapping machine with high efficiency, good quality, but its cost is too high, is not conducive to reducing automotive product develop-ment cost. Therefore, the pure hand wrapping mode and automatic hemming machine model combine the pattern of manual wrapping mold design, which achieve high binding efficiency and quality.