光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2013年
5期
138-144
,共7页
廖家胜%巩岩%袁文全%骆聪
廖傢勝%鞏巖%袁文全%駱聰
료가성%공암%원문전%락총
光学结构胶%应变%有限元%固化应力%粘弹性
光學結構膠%應變%有限元%固化應力%粘彈性
광학결구효%응변%유한원%고화응력%점탄성
optical structure adhesives%strain%FEM%curing stress%viscoelastic
基于光学中一种特殊的胶接模型,设计一种新的实验方案研究恒温下低应力光学结构胶固化过程中内应力随时间的变化,实验利用电测原理,通过监测固化过程中被粘物体(钢片)中心点的变形,反推胶的固化性质.本文先从理论上分析结构胶固化过程的规律,然后选取两种低应力光学结构胶3140RTV和UV295进行为期一周的测试,并对实验曲线进行了分析.此外,通过对实验模型做一些理论上的假设,并结合有限元软件计算结构胶残余应力对钢片的影响,进而比较出两种结构胶性能的好坏,该计算结果和实验曲线分析进一步阐述了实验设计的目的及意义.
基于光學中一種特殊的膠接模型,設計一種新的實驗方案研究恆溫下低應力光學結構膠固化過程中內應力隨時間的變化,實驗利用電測原理,通過鑑測固化過程中被粘物體(鋼片)中心點的變形,反推膠的固化性質.本文先從理論上分析結構膠固化過程的規律,然後選取兩種低應力光學結構膠3140RTV和UV295進行為期一週的測試,併對實驗麯線進行瞭分析.此外,通過對實驗模型做一些理論上的假設,併結閤有限元軟件計算結構膠殘餘應力對鋼片的影響,進而比較齣兩種結構膠性能的好壞,該計算結果和實驗麯線分析進一步闡述瞭實驗設計的目的及意義.
기우광학중일충특수적효접모형,설계일충신적실험방안연구항온하저응력광학결구효고화과정중내응력수시간적변화,실험이용전측원리,통과감측고화과정중피점물체(강편)중심점적변형,반추효적고화성질.본문선종이론상분석결구효고화과정적규률,연후선취량충저응력광학결구효3140RTV화UV295진행위기일주적측시,병대실험곡선진행료분석.차외,통과대실험모형주일사이론상적가설,병결합유한원연건계산결구효잔여응력대강편적영향,진이비교출량충결구효성능적호배,해계산결과화실험곡선분석진일보천술료실험설계적목적급의의.
Based on a special bonding structure, a new experiment device was designed to research the relation of low stress optical structure adhesives between internal stress and time. Through the experiment based on electrical method, the structure’s curing property was oppositely deduced by monitoring deformation of the bonded object (steel piece) core. Firstly, the theoretical law of structure adhesives’ curing process is analyzed. Then, two low stress structure adhesives 3140RTV and UV295 were chosen to be tested for a week, and the curve gotten from the experiment was analyzed. Taking advantage of Finite Element Method (FEM) software with a little theoretical hypothesis, influence of residue stress of the two structure adhesives on steel piece was calculated, and the result answers which structure adhesive is better. The calculation result and the experiment curves’ analysis further explain the purpose and significance of the experiment.