广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2013年
7期
50-51
,共2页
注水%渗透率%高压增注
註水%滲透率%高壓增註
주수%삼투솔%고압증주
water injection%permeability%high-pressure injection
油田目的层为低孔特低渗储层,油藏边部砂体厚度薄,物性差,需要注水启动压力大,常压下注水困难.本论文针对这一情况开展高压增注可行性研究,通过适当提高井口注水压力来达到增加注水量,提高水驱波及系数,提高单井产油量.
油田目的層為低孔特低滲儲層,油藏邊部砂體厚度薄,物性差,需要註水啟動壓力大,常壓下註水睏難.本論文針對這一情況開展高壓增註可行性研究,通過適噹提高井口註水壓力來達到增加註水量,提高水驅波及繫數,提高單井產油量.
유전목적층위저공특저삼저층,유장변부사체후도박,물성차,수요주수계동압력대,상압하주수곤난.본논문침대저일정황개전고압증주가행성연구,통과괄당제고정구주수압력래체도증가주수량,제고수구파급계수,제고단정산유량.
Oil objective layer for low porosity and low permeability reservoir, the reservoir boundary thickness of sand thin, poor physical property, need high water injection starting pressure, pressure water injection is difficult. In this paper, aiming at the situation of high pressure injection feasibility study, by improving the well head injection pressure to increase water injection, improve the water flood sweep efficiency, increase the single well oil production.