电子设计工程
電子設計工程
전자설계공정
ELECTRONIC DESIGN ENGINEERING
2014年
23期
70-73
,共4页
UP-CUP IOT A8-II平台%嵌入式ARMv7%WIFI无线网卡%无线通信模块%飞行控制模块
UP-CUP IOT A8-II平檯%嵌入式ARMv7%WIFI無線網卡%無線通信模塊%飛行控製模塊
UP-CUP IOT A8-II평태%감입식ARMv7%WIFI무선망잡%무선통신모괴%비행공제모괴
UP-CUP IOT A8-II platform%embedded ARMv7%WIFI wireless card%wireless communication module%flight control module
针对监测飞行器的智能化和小型化的要求,本系统采用物联网UP-CUP IOT A8-II平台,详细介绍了基于嵌入式ARMv7的飞行器的模块化设计方案,包括采用德国原装进口LHI778探头的红外传感器等组成的信息采集模块,具有USB接口的WIFI无线网卡和2.4G的射频组成的无线通信模块及控制飞行器飞行姿态的飞行控制模块等,最后通过手持终端和PC终端进行了系统测试。结果表明整个系统设计合理,具有一定的工程应用价值。
針對鑑測飛行器的智能化和小型化的要求,本繫統採用物聯網UP-CUP IOT A8-II平檯,詳細介紹瞭基于嵌入式ARMv7的飛行器的模塊化設計方案,包括採用德國原裝進口LHI778探頭的紅外傳感器等組成的信息採集模塊,具有USB接口的WIFI無線網卡和2.4G的射頻組成的無線通信模塊及控製飛行器飛行姿態的飛行控製模塊等,最後通過手持終耑和PC終耑進行瞭繫統測試。結果錶明整箇繫統設計閤理,具有一定的工程應用價值。
침대감측비행기적지능화화소형화적요구,본계통채용물련망UP-CUP IOT A8-II평태,상세개소료기우감입식ARMv7적비행기적모괴화설계방안,포괄채용덕국원장진구LHI778탐두적홍외전감기등조성적신식채집모괴,구유USB접구적WIFI무선망잡화2.4G적사빈조성적무선통신모괴급공제비행기비행자태적비행공제모괴등,최후통과수지종단화PC종단진행료계통측시。결과표명정개계통설계합리,구유일정적공정응용개치。
In order to satisfy the intelligence and the smart of the intelligent Flight Vehicle , the design of Flight Vehicle System adopts the UP-CUP IOT A8-II platform, The hardware ande the software system system was introduced in detail the modularization design scheme based on embedded ARMv7 aircraft,including information acquisition module using German original installation import LHI778 probe,wireless communication module having the function of the USB WIFI wireless card and 2.4 G RF, and flight control modules to control the flight attitude, and so on.Finally, the system's function is test through the handheld terminal and PC terminal . The results show that the whole system design is reasonable , has certain engineering application value.