CAJ | 학술논문

目的：研究利用共固化法激光快速成形制备个体化生物陶瓷支架的可行性。方法首先建立立方纵孔生物陶瓷支架三维数字模型，利用激光快速成形技术制备的光硬化树脂负型母板实体，分别用传统聚乙烯醇和光硬化树脂作为结合剂与三磷酸钙粉末混合制备粉浆并填充入负模板，后者烧结前紫外光照射共硬化3 h，随后高温烧结制备陶瓷支架，进行形态学观察和生物亲和性考察。结果传统聚乙烯醇组烧结的支架孔道结构融合且裂隙形成，而共固化法烧结的支架孔道结构精细无融合，无裂缝产生，生物亲和性良好。结论共固化法激光快速成形技术可以作为间接法制备个体化生物陶瓷支架的新技术应用于组织工程中。
목적：연구이용공고화법격광쾌속성형제비개체화생물도자지가적가행성。방법수선건립립방종공생물도자지가삼유수자모형，이용격광쾌속성형기술제비적광경화수지부형모판실체，분별용전통취을희순화광경화수지작위결합제여삼린산개분말혼합제비분장병전충입부모판，후자소결전자외광조사공경화3 h，수후고온소결제비도자지가，진행형태학관찰화생물친화성고찰。결과전통취을희순조소결적지가공도결구융합차렬극형성，이공고화법소결적지가공도결구정세무융합，무렬봉산생，생물친화성량호。결론공고화법격광쾌속성형기술가이작위간접법제비개체화생물도자지가적신기술응용우조직공정중。
Objective To study the feasibility of fabricating porous ceramic scaffolds by co-curation stereolithography technique .Methods The 3 D digital model of the ceramic scaffold and the negative UV-cured resin mould were made by RP first , and then filled in with PVA or UV-curable resin for sintering .The co-curing group was undergoing pre-UV-treatment for 3 h before sintering .Results The morphological study showed that scaffolds from PVA group had fused pores and cracks , but the co-curing group scaffolds had well-controlled pore structure without fusion and cracks .Conclusion The co-curation stereolithography technique is feasible for tissue engineering scaffold fabrication .