粉末冶金材料科学与工程
粉末冶金材料科學與工程
분말야금재료과학여공정
POWDER METALLURGY MATERIALS SCIENCE AND ENGINEERING
2014年
6期
972-977
,共6页
李国禄%董天顺%刘金海%张建军
李國祿%董天順%劉金海%張建軍
리국록%동천순%류금해%장건군
CADI%腐蚀磨损%等温淬火温度%残余奥氏体
CADI%腐蝕磨損%等溫淬火溫度%殘餘奧氏體
CADI%부식마손%등온쉬화온도%잔여오씨체
CADI%corrosion wear%austempered temperature%residual austenite
通过等温淬火获得含碳化物等温淬火球墨铸铁(carbidic austempered ductile iron,简称CADI),并分别在中性、酸性和碱性腐蚀介质中进行腐蚀磨损实验,研究淬火温度对CADI在不同腐蚀介质中耐腐蚀磨损特性的影响,并与低铬铸铁进行对比。结果表明:在酸性和碱性介质中,CADI 的质量磨损随等温淬火温度升高先增加,然后再减少;在中性介质中,CADI 的质量磨损随等温淬火温度升高而逐渐增加;CADI 在酸性介质中的耐腐蚀磨损性能相对较差;CADI在不同pH值溶液中的耐磨损性能均优于低铬铸铁,是一种优良的耐腐蚀磨损材料。
通過等溫淬火穫得含碳化物等溫淬火毬墨鑄鐵(carbidic austempered ductile iron,簡稱CADI),併分彆在中性、痠性和堿性腐蝕介質中進行腐蝕磨損實驗,研究淬火溫度對CADI在不同腐蝕介質中耐腐蝕磨損特性的影響,併與低鉻鑄鐵進行對比。結果錶明:在痠性和堿性介質中,CADI 的質量磨損隨等溫淬火溫度升高先增加,然後再減少;在中性介質中,CADI 的質量磨損隨等溫淬火溫度升高而逐漸增加;CADI 在痠性介質中的耐腐蝕磨損性能相對較差;CADI在不同pH值溶液中的耐磨損性能均優于低鉻鑄鐵,是一種優良的耐腐蝕磨損材料。
통과등온쉬화획득함탄화물등온쉬화구묵주철(carbidic austempered ductile iron,간칭CADI),병분별재중성、산성화감성부식개질중진행부식마손실험,연구쉬화온도대CADI재불동부식개질중내부식마손특성적영향,병여저락주철진행대비。결과표명:재산성화감성개질중,CADI 적질량마손수등온쉬화온도승고선증가,연후재감소;재중성개질중,CADI 적질량마손수등온쉬화온도승고이축점증가;CADI 재산성개질중적내부식마손성능상대교차;CADI재불동pH치용액중적내마손성능균우우저락주철,시일충우량적내부식마손재료。
In order to study the effects of austempered temperature on corrosive wear behaviors of carbidic austempered ductile iron (CADI), the CADI was prepared, and the wear corrosion resistance test was conducted in acid medium, neutral medium and alkaline medium, respectively. The results show that in acid medium and alkaline medium, the mass loss of CADI first increased and then decreased with increasing austempered temperature. But in neutral medium, the mass loss of CADI increased gradually with increasing austempered temperature. The performance of corrosion wear resistance of CADI in acid medium is inferior to that in alkaline medium and neutral medium. While the performance of corrosion wear resistance of CADI is obviously superior to that of low chromium white cast iron under different pH values medium. Therefore, CADI is a material with good property of corrosion wear resistance.