中国电机工程学报
中國電機工程學報
중국전궤공정학보
ZHONGGUO DIANJI GONGCHENG XUEBAO
2014年
z1期
153-159
,共7页
凌敬%杜鑫%王松涛%王仲奇
凌敬%杜鑫%王鬆濤%王仲奇
릉경%두흠%왕송도%왕중기
扩压叶栅%负荷%最佳弯高%最佳弯角%展弦比
擴壓葉柵%負荷%最佳彎高%最佳彎角%展絃比
확압협책%부하%최가만고%최가만각%전현비
linear compressor cascade%blade loading%optimum curved height%optimum curved angle%cascade aspect ratio
为了研究亚声速扩压叶栅最佳弯叶片参数与叶栅展弦比的关系,在7个不同展弦比下对7组共49个方案进行数值模拟。数值模拟结果表明:在同一个弯角下,叶栅损失随弯高的增大而减小,50%弯高时叶栅损失最小,弯叶片最佳弯高为50%;弯叶片弯高相同时,叶栅损失随弯角增大呈现抛物线型变化规律,损失随弯角增大先减小再增大,存在一个最佳弯角(αopt)使叶栅损失最小。最佳弯角与直叶片的负荷展向不均匀度正相关,总体趋势上两者都随叶栅展弦比的增大而减小。但是,展弦比越小端区流动对叶展中部的影响越大,叶片中部的叶型损失增大越明显,弯叶片的弯角越大叶型损失增加越明显,所以小展弦比时最佳弯角随展弦比增大有小幅度增大。
為瞭研究亞聲速擴壓葉柵最佳彎葉片參數與葉柵展絃比的關繫,在7箇不同展絃比下對7組共49箇方案進行數值模擬。數值模擬結果錶明:在同一箇彎角下,葉柵損失隨彎高的增大而減小,50%彎高時葉柵損失最小,彎葉片最佳彎高為50%;彎葉片彎高相同時,葉柵損失隨彎角增大呈現拋物線型變化規律,損失隨彎角增大先減小再增大,存在一箇最佳彎角(αopt)使葉柵損失最小。最佳彎角與直葉片的負荷展嚮不均勻度正相關,總體趨勢上兩者都隨葉柵展絃比的增大而減小。但是,展絃比越小耑區流動對葉展中部的影響越大,葉片中部的葉型損失增大越明顯,彎葉片的彎角越大葉型損失增加越明顯,所以小展絃比時最佳彎角隨展絃比增大有小幅度增大。
위료연구아성속확압협책최가만협편삼수여협책전현비적관계,재7개불동전현비하대7조공49개방안진행수치모의。수치모의결과표명:재동일개만각하,협책손실수만고적증대이감소,50%만고시협책손실최소,만협편최가만고위50%;만협편만고상동시,협책손실수만각증대정현포물선형변화규률,손실수만각증대선감소재증대,존재일개최가만각(αopt)사협책손실최소。최가만각여직협편적부하전향불균균도정상관,총체추세상량자도수협책전현비적증대이감소。단시,전현비월소단구류동대협전중부적영향월대,협편중부적협형손실증대월명현,만협편적만각월대협형손실증가월명현,소이소전현비시최가만각수전현비증대유소폭도증대。
ABSTRACT:In order to research the relationship of optimum curved blade stack line and cascade aspect ratio in linear compressor cascade, 49 schemes at 7 different aspect ratio were simulated. Numerical results show that cascade loss decreases with the increase of curved height at the same curved angle, and the optimum curved height is 50%. Loss variation with curved angle presents an approximate parabola type at the same curved height. There is an optimum curved angle with the increase of curved angle, at which the total loss is minimal. The optimum angle is positively correlated with the local blade loading variation along span wise, and both of them decrease with the increase of aspect ratio in the overall trend. Profile loss at mid span increases because of the influence of end wall flow, the smaller the aspect ratio, the larger the profile loss;the larger the curved angle, the larger the profile loss. The optimum curved angle could modestly increases with aspect ratio increasing.