石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2014年
6期
42-44,49
,共4页
张华卫%吴为%王学杰%赵向阳
張華衛%吳為%王學傑%趙嚮暘
장화위%오위%왕학걸%조향양
尾管负压试压%参数计算%工艺流程%解释方法%现场应用
尾管負壓試壓%參數計算%工藝流程%解釋方法%現場應用
미관부압시압%삼수계산%공예류정%해석방법%현장응용
negative pressure test for liner%parameter calculation%process flow%interpretation method%field application
使用尾管开采高压油气藏时,尾管重叠段的负压试压的成功与否关系到该段尾管是否能成为油井屏障的关键,而尾管重叠段负压测试的推荐做法和解释程序国内一直没有明确的规定。通过调研相关的技术标准和著名石油公司的推荐做法,对尾管重叠段进行负压试压的条件、工艺等进行了深入研究,建立了一套完整的尾管负压试压方法,包括参数计算方法、工艺流程、试压结果解释方法。提出的尾管负压试压方法在伊朗Y油田进行了应用,证明可行并能满足现场试压的需要。
使用尾管開採高壓油氣藏時,尾管重疊段的負壓試壓的成功與否關繫到該段尾管是否能成為油井屏障的關鍵,而尾管重疊段負壓測試的推薦做法和解釋程序國內一直沒有明確的規定。通過調研相關的技術標準和著名石油公司的推薦做法,對尾管重疊段進行負壓試壓的條件、工藝等進行瞭深入研究,建立瞭一套完整的尾管負壓試壓方法,包括參數計算方法、工藝流程、試壓結果解釋方法。提齣的尾管負壓試壓方法在伊朗Y油田進行瞭應用,證明可行併能滿足現場試壓的需要。
사용미관개채고압유기장시,미관중첩단적부압시압적성공여부관계도해단미관시부능성위유정병장적관건,이미관중첩단부압측시적추천주법화해석정서국내일직몰유명학적규정。통과조연상관적기술표준화저명석유공사적추천주법,대미관중첩단진행부압시압적조건、공예등진행료심입연구,건립료일투완정적미관부압시압방법,포괄삼수계산방법、공예류정、시압결과해석방법。제출적미관부압시압방법재이랑Y유전진행료응용,증명가행병능만족현장시압적수요。
When liner is used to exploit the high pressure oil/gas reservoirs, the success of negative pressure test on the overlay section of the liner has a direct bearing on whether the liner will become the key well barrier, but the recommended practice for nega-tive pressure test on such overlay section is not expressly speciifed domestically. By studying the relevant technical standards and the recommended practices of well-known oil companies, profound research was conducted on the conditions and technologies for negative pressure test on the overlay section of liner, and a set of complete methods of negative pressure test for liner were established, includ-ing parameter calculation method, process lfow and interpretation method for pressure test results. The proposed negative pressure test method for liner was used in Iran Y Oilifeld, and was proved to be viable and could meet the requirement of ifeld pressure test.