水力发电
水力髮電
수력발전
WATER POWER
2014年
12期
59-62,100
,共5页
拍式浮体门%水封%线压力%压缩量%接触宽度%接触应力%鲁地拉水电站
拍式浮體門%水封%線壓力%壓縮量%接觸寬度%接觸應力%魯地拉水電站
박식부체문%수봉%선압력%압축량%접촉관도%접촉응력%로지랍수전참
floating flap gate%sealing%line pressure%compression%width of contact%contact stress%Ludila Hydropower Station
对鲁地拉水电站拍式浮体闸门水封的工作性能进行了分析。首先,分析拍式浮体闸门的支撑形式和受力方式,得到闸门边缘框形水封线荷载的分布;其次,根据有限变形理论,利用ABAQUS对水封进行非线性仿真计算,得到水封封头“压缩量-线压力-封头接触宽度、接触应力”关系曲线;最后,按框形水封断面处的线压力反查关系曲线,得到封头压缩量、接触宽度、接触应力等封水水密性特征值,用于判断水封封水的严密性。将仿真计算结果与实际情况对比,可知该拍式浮体闸门止水水封变形形态与仿真计算结果极为接近。
對魯地拉水電站拍式浮體閘門水封的工作性能進行瞭分析。首先,分析拍式浮體閘門的支撐形式和受力方式,得到閘門邊緣框形水封線荷載的分佈;其次,根據有限變形理論,利用ABAQUS對水封進行非線性倣真計算,得到水封封頭“壓縮量-線壓力-封頭接觸寬度、接觸應力”關繫麯線;最後,按框形水封斷麵處的線壓力反查關繫麯線,得到封頭壓縮量、接觸寬度、接觸應力等封水水密性特徵值,用于判斷水封封水的嚴密性。將倣真計算結果與實際情況對比,可知該拍式浮體閘門止水水封變形形態與倣真計算結果極為接近。
대로지랍수전참박식부체갑문수봉적공작성능진행료분석。수선,분석박식부체갑문적지탱형식화수력방식,득도갑문변연광형수봉선하재적분포;기차,근거유한변형이론,이용ABAQUS대수봉진행비선성방진계산,득도수봉봉두“압축량-선압력-봉두접촉관도、접촉응력”관계곡선;최후,안광형수봉단면처적선압력반사관계곡선,득도봉두압축량、접촉관도、접촉응력등봉수수밀성특정치,용우판단수봉봉수적엄밀성。장방진계산결과여실제정황대비,가지해박식부체갑문지수수봉변형형태여방진계산결과겁위접근。
The operation performances of the sealing of floating flap gate in Ludila Hydropower Station are analyzed. Firstly, the support form and stress of floating flap gate are analyzed to obtain the distribution of water sealing line load along the frame of gate. Secondly, the nonlinear simulation of sealing is carried out by using finite element analysis software ABAQUS based on finite deformation theory to get the curves of compression-line pressure- width of contact /contact stress of sealing head. Finally, according to the line pressure of frame seal section, the compression, width of contact and contact stress of sealing head can be obtained by curve interpolation to determine the tightness of water sealing. By comparing simulation results and actual gate operation, the actual deformation of sealing is very close to the simulation results.