CAJ | 학술논문

研制一套橡胶衬套压装设备。利用有限元技术对压装过程中橡胶衬套的应力变化和弹性变形进行非线性分析，根据分析结果进行了压装机的机械结构和液压系统等主要方面的设计。实践结果表明：该压装机不仅能够对后扭梁上的两个橡胶衬套同时进行总成装配，提高压装效率，而且通用性好，能适用多种车型的后扭梁总成装配。
연제일투상효츤투압장설비。이용유한원기술대압장과정중상효츤투적응력변화화탄성변형진행비선성분석，근거분석결과진행료압장궤적궤계결구화액압계통등주요방면적설계。실천결과표명：해압장궤불부능구대후뉴량상적량개상효츤투동시진행총성장배，제고압장효솔，이차통용성호，능괄용다충차형적후뉴량총성장배。
An equipment of rubber bushing press-fit was developed. Using finite element technology,nonlinear analyses about the stress changes and elastic deformation of rubber bushing in the fitting process were shown. According to the analyses results,the major designs of rubber bushing press-fit equipment were finished,including the mechanical structure and hydraulic system. The results show that rubber bushing press-fit equipment can be used to assemble two rubber bushings on the rear twist beam in the same time and the efficiency is greatly improved. Besides,it has the versatility so that can be applied to a variety of models.