功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
24期
24030-24034
,共5页
涤纶长丝%超高分子量聚乙烯%木材%复合结构设计%胶合性能
滌綸長絲%超高分子量聚乙烯%木材%複閤結構設計%膠閤性能
조륜장사%초고분자량취을희%목재%복합결구설계%효합성능
polyester filament%Ultra high molecular weight polyethylene (UHMWPE )fiber%lumber%composite structure design%bonding performance
采用涤纶长丝和超高分子量聚乙烯(UHM-WPE)纤维编织斜纹布,并与木材复合实现增强的效果,研究了斜纹布与木材复合结构的胶合性能,探讨了UHMWPE在木质材料领域应用的可行性。从斜纹布铺装宽度比设计入手,研究了该复合结构的胶合性能,并对其相关机理进行分析。结果表明,由于木材自身尤其是针叶树材剪切强度(ILSS)较低,PUR 木材层压胶可用做斜纹布/木材复合的基体树脂;在3种 UH-MWPE产品形式中斜纹布的综合性能最优;在拉伸强度允许情况下,采用适当降低斜纹布铺装宽度比的方法可显著提高斜纹布/木材复合结构的 ILSS 值,并从胶层厚度变化入手对影响机理进行了分析。
採用滌綸長絲和超高分子量聚乙烯(UHM-WPE)纖維編織斜紋佈,併與木材複閤實現增彊的效果,研究瞭斜紋佈與木材複閤結構的膠閤性能,探討瞭UHMWPE在木質材料領域應用的可行性。從斜紋佈鋪裝寬度比設計入手,研究瞭該複閤結構的膠閤性能,併對其相關機理進行分析。結果錶明,由于木材自身尤其是針葉樹材剪切彊度(ILSS)較低,PUR 木材層壓膠可用做斜紋佈/木材複閤的基體樹脂;在3種 UH-MWPE產品形式中斜紋佈的綜閤性能最優;在拉伸彊度允許情況下,採用適噹降低斜紋佈鋪裝寬度比的方法可顯著提高斜紋佈/木材複閤結構的 ILSS 值,併從膠層厚度變化入手對影響機理進行瞭分析。
채용조륜장사화초고분자량취을희(UHM-WPE)섬유편직사문포,병여목재복합실현증강적효과,연구료사문포여목재복합결구적효합성능,탐토료UHMWPE재목질재료영역응용적가행성。종사문포포장관도비설계입수,연구료해복합결구적효합성능,병대기상관궤리진행분석。결과표명,유우목재자신우기시침협수재전절강도(ILSS)교저,PUR 목재층압효가용주사문포/목재복합적기체수지;재3충 UH-MWPE산품형식중사문포적종합성능최우;재랍신강도윤허정황하,채용괄당강저사문포포장관도비적방법가현저제고사문포/목재복합결구적 ILSS 치,병종효층후도변화입수대영향궤리진행료분석。
The twill wove using polyester filament and ultra-high molecular weight polyethylene (UHMWPE) fiber.The bonding performance of composites manufactured with wood lumber and the twill were studied, which was to explore the feasibility of UHMWPE in the field of wooden materials application.The twill widths in the structure of wood composites were designed,and the bonding mechanism was also analyzed.The results show that PUR adhesive could be used as twill/wood composite resin because of the lumber especially softwood lumber had low ILSS.The twill/wood composite had the best comprehensive performance in three kinds of forms of UHMWPE products.The ILSS of twill/wood composite could be significantly improved by decreasing the twill pavement width ratio.At last,the influence bonding mechanism was analyzed at the bondline thickness transition area.