CAJ | 학술논문

采用纳米压入法对 Sn-3．0Ag-0．5Cu、Sn-0．7 Cu及Sn-3．5 Ag无铅焊料的室温应变率敏感性进行研究.相同压深下，压入载荷随着加载应变率的提高而增大；3种焊料的接触刚度均随压深近似线性增加，不同应变率下弹性模量基本不变；硬度随着应变率的增加而增大，表明了无铅焊料的塑性应变率强化性.保载阶段蠕变位移随加载段应变率的增加而增大，蠕变应变率先急剧下降然后趋于稳定.通过系统研究应变率对3种常用无铅焊料力学性能的影响，为评价无铅焊点的服役可靠性提供参考.
채용납미압입법대 Sn-3．0Ag-0．5Cu、Sn-0．7 Cu급Sn-3．5 Ag무연한료적실온응변솔민감성진행연구.상동압심하，압입재하수착가재응변솔적제고이증대；3충한료적접촉강도균수압심근사선성증가，불동응변솔하탄성모량기본불변；경도수착응변솔적증가이증대，표명료무연한료적소성응변솔강화성.보재계단연변위이수가재단응변솔적증가이증대，연변응변솔선급극하강연후추우은정.통과계통연구응변솔대3충상용무연한료역학성능적영향，위평개무연한점적복역가고성제공삼고.
Nanoindentation tests were conducted on lead-free solders of Sn-3.0Ag-0.5Cu,Sn-0.7Cu and Sn-3.5Ag to investigate the strain rate sensitivity at room temperature.For the lead-free solders,indentation load under the same indentation depth increases with increasing loading strain rate.The contact stiffness during loading in-creases with indentation depth approximatively linearly,and the elastic modulus of the lead-free solders under different strain rates basically remains unchanged.The hardness increases as strain rate increases,indicating the strain rate hardening effect of viscous solders.During the holding stage,creep displacement increases with in-creasing strain rate during loading,while the creep strain rate firstly declines sharply and then stabilizes.Effects of stain rate on the mechanical properties of lead-free solders was systematically studied,providing valuable in-formation for the reliability evaluation of lead-free solder j oints in the service process.