塑料工业
塑料工業
소료공업
CHINA PLASTICS INDUSTRY
2014年
11期
52-55
,共4页
熊鹏%黄兴元%柳和生%李孟山
熊鵬%黃興元%柳和生%李孟山
웅붕%황흥원%류화생%리맹산
微孔塑料%压力降速率%剪切速率%气辅
微孔塑料%壓力降速率%剪切速率%氣輔
미공소료%압력강속솔%전절속솔%기보
Microcellular Plastics%Pressure Drop Rate%Shear Rate%Gas-assisted
微孔塑料连续挤出成型需要有更大的压力降速率,文章通过对毛细管口模的传统挤出和气辅挤出两种挤出进行模拟,对两种挤出中的压力场和剪切速率进行分析比较,研究气辅技术在微孔塑料连续挤出中对压力降速率的影响,从气泡成核和气泡核长大方面分析气辅技术在微孔塑料连续挤出中的应用价值.研究发现,口模内熔体的压力降取决于无滑移段长度,无滑移段和气辅段均对压力降速率无影响;气辅段熔体没有气泡核生成,气辅段气泡核只进行长大,气体的快速流动可以加快熔体的冷却,有利于控制气泡的长大,而且气辅技术可以减小挤出胀大,气辅技术在微孔塑料连续挤出中有一定的应用价值.
微孔塑料連續擠齣成型需要有更大的壓力降速率,文章通過對毛細管口模的傳統擠齣和氣輔擠齣兩種擠齣進行模擬,對兩種擠齣中的壓力場和剪切速率進行分析比較,研究氣輔技術在微孔塑料連續擠齣中對壓力降速率的影響,從氣泡成覈和氣泡覈長大方麵分析氣輔技術在微孔塑料連續擠齣中的應用價值.研究髮現,口模內鎔體的壓力降取決于無滑移段長度,無滑移段和氣輔段均對壓力降速率無影響;氣輔段鎔體沒有氣泡覈生成,氣輔段氣泡覈隻進行長大,氣體的快速流動可以加快鎔體的冷卻,有利于控製氣泡的長大,而且氣輔技術可以減小擠齣脹大,氣輔技術在微孔塑料連續擠齣中有一定的應用價值.
미공소료련속제출성형수요유경대적압력강속솔,문장통과대모세관구모적전통제출화기보제출량충제출진행모의,대량충제출중적압력장화전절속솔진행분석비교,연구기보기술재미공소료련속제출중대압력강속솔적영향,종기포성핵화기포핵장대방면분석기보기술재미공소료련속제출중적응용개치.연구발현,구모내용체적압력강취결우무활이단장도,무활이단화기보단균대압력강속솔무영향;기보단용체몰유기포핵생성,기보단기포핵지진행장대,기체적쾌속류동가이가쾌용체적냉각,유리우공제기포적장대,이차기보기술가이감소제출창대,기보기술재미공소료련속제출중유일정적응용개치.