有色金属科学与工程
有色金屬科學與工程
유색금속과학여공정
JIANGXI NONFERROUS METALS
2014年
6期
71-79
,共9页
液相共烧结%界面应力%液相迁移%梯度功能材料
液相共燒結%界麵應力%液相遷移%梯度功能材料
액상공소결%계면응력%액상천이%제도공능재료
liquid phase co-sintering%interface stress%LPM%FGM
目前液相共烧结工艺相容性问题是限制功能梯度材料制备技术的关键问题之一,研究其理论模型具有重要的意义。基于现有液相烧结、液相迁移和固相共烧结模型的分析,提出了以颗粒半径、相对密度和液相体积分数为基本参数的液相共烧结模型,模拟预测了液相共烧结两端异种材料致密化和液相迁移的过程,并通过YG类硬质合金实验加以验证。实验结果表明:共烧结试样界面两端材料的密度及Co含量呈现梯度变化,其梯度分布与计算拟合的变化趋势一致,本研究建立的模型较准确地预测了YG8梯度硬质合金Co含量和密度沿梯度方向的变化规律。
目前液相共燒結工藝相容性問題是限製功能梯度材料製備技術的關鍵問題之一,研究其理論模型具有重要的意義。基于現有液相燒結、液相遷移和固相共燒結模型的分析,提齣瞭以顆粒半徑、相對密度和液相體積分數為基本參數的液相共燒結模型,模擬預測瞭液相共燒結兩耑異種材料緻密化和液相遷移的過程,併通過YG類硬質閤金實驗加以驗證。實驗結果錶明:共燒結試樣界麵兩耑材料的密度及Co含量呈現梯度變化,其梯度分佈與計算擬閤的變化趨勢一緻,本研究建立的模型較準確地預測瞭YG8梯度硬質閤金Co含量和密度沿梯度方嚮的變化規律。
목전액상공소결공예상용성문제시한제공능제도재료제비기술적관건문제지일,연구기이론모형구유중요적의의。기우현유액상소결、액상천이화고상공소결모형적분석,제출료이과립반경、상대밀도화액상체적분수위기본삼수적액상공소결모형,모의예측료액상공소결량단이충재료치밀화화액상천이적과정,병통과YG류경질합금실험가이험증。실험결과표명:공소결시양계면량단재료적밀도급Co함량정현제도변화,기제도분포여계산의합적변화추세일치,본연구건립적모형교준학지예측료YG8제도경질합금Co함량화밀도연제도방향적변화규률。
Liquid phase co-sintering compatibility is one of the key technological problems in producing functionally graded materials(FGM), which is meaningful for studying the theoretical model. On the basis of the existing liquid phase sintering, LPM and solid phases co-sintering model, a liquid phase co-sintering model is established according to the basic parameters including the grain radius, the relative density and the liquid volume fraction. The methodologies and techniques described can be applied to simulate and predict the composition gradients and density during liquid phase co-sintering, which can be testified by YG cemented carbide experiment. The result shows that the density and Co content of the material in the both ends of the co-sintering sample interface presents gradient variation, which is in agreement with the variation of the calculation fitting. The established model can predict Co content of the YG8 cemented carbide and the gradient variation change rule of the density.