现代制造工程
現代製造工程
현대제조공정
MODERN MANUFACTURING ENGINEERING
2014年
12期
82-86
,共5页
潘颂哲%蔡晋辉%姚燕%陈泽熹%周乔君
潘頌哲%蔡晉輝%姚燕%陳澤熹%週喬君
반송철%채진휘%요연%진택희%주교군
燃气调压器%静特性%PID控制%模糊控制%机器性能指数
燃氣調壓器%靜特性%PID控製%模糊控製%機器性能指數
연기조압기%정특성%PID공제%모호공제%궤기성능지수
gas regulator%static characteristics%PID control%fuzzy control%machine performance index
针对目前燃气调压器性能检测装置的自动化程度低、测试精度差等缺点,研制了一种燃气调压器性能检测系统。该系统采用PID控制和模糊控制,自动调节调压器的进口压力和流量,并通过采集调压器出口压力,实现了调压器的静特性测试。实验研究表明,该检测系统能够准确地实现调压器的性能检测,其进口压力控制误差范围在±0.005MPa内,流量控制精度达到了1.31%,最小机器性能指数为2.43。
針對目前燃氣調壓器性能檢測裝置的自動化程度低、測試精度差等缺點,研製瞭一種燃氣調壓器性能檢測繫統。該繫統採用PID控製和模糊控製,自動調節調壓器的進口壓力和流量,併通過採集調壓器齣口壓力,實現瞭調壓器的靜特性測試。實驗研究錶明,該檢測繫統能夠準確地實現調壓器的性能檢測,其進口壓力控製誤差範圍在±0.005MPa內,流量控製精度達到瞭1.31%,最小機器性能指數為2.43。
침대목전연기조압기성능검측장치적자동화정도저、측시정도차등결점,연제료일충연기조압기성능검측계통。해계통채용PID공제화모호공제,자동조절조압기적진구압력화류량,병통과채집조압기출구압력,실현료조압기적정특성측시。실험연구표명,해검측계통능구준학지실현조압기적성능검측,기진구압력공제오차범위재±0.005MPa내,류량공제정도체도료1.31%,최소궤기성능지수위2.43。
In order to deal with the shortcomings of the performance detection device of current gas regulator ,such as low automat-ic level and poor test accuracy ,a gas regulator performance detection system is designed and tested .By using PID control and fuzzy control to adjust the inlet pressure as well as the flow of the gas regulator and by observing the outlet pressure of the gas reg -ulator,the system can achieve static characteristics test through detection .Experiments show that this detection system is able to detect the regulator accurately ,the error of its inlet pressure is controlled within ±0.005MPa,the precision of its flow control reaches 1.31%,and the minimum value of its machine performance index is 2.43.