激光杂志
激光雜誌
격광잡지
LASER JOURNAL
2014年
12期
151-154
,共4页
激光器%盐/PS混合粉末%激光烧结成型%收缩%微观形态
激光器%鹽/PS混閤粉末%激光燒結成型%收縮%微觀形態
격광기%염/PS혼합분말%격광소결성형%수축%미관형태
Lasers%Salt/PS mixed powder%Laser sintering and forming%Shrinkage%Microstructure morphology
本文针对盐雕工艺品个性化需求及现有模铸方法成本高、周期长等弊端，提出激光烧结快速成型盐雕的工艺方法，对盐/PS混合粉末进行了选择性激光烧结工艺实验研究，给出了盐/PS粉末组分及工艺参数对烧结成型收缩率的影响规律，微观形态观察表明，激光烧结使得PS粉末熔化实现对盐粉颗粒的包裹并粘结成型，并给出了能够实现良好烧结成型的材料配比，为盐雕工艺品个性化制造提供了一条可行的工艺途径。
本文針對鹽彫工藝品箇性化需求及現有模鑄方法成本高、週期長等弊耑，提齣激光燒結快速成型鹽彫的工藝方法，對鹽/PS混閤粉末進行瞭選擇性激光燒結工藝實驗研究，給齣瞭鹽/PS粉末組分及工藝參數對燒結成型收縮率的影響規律，微觀形態觀察錶明，激光燒結使得PS粉末鎔化實現對鹽粉顆粒的包裹併粘結成型，併給齣瞭能夠實現良好燒結成型的材料配比，為鹽彫工藝品箇性化製造提供瞭一條可行的工藝途徑。
본문침대염조공예품개성화수구급현유모주방법성본고、주기장등폐단，제출격광소결쾌속성형염조적공예방법，대염/PS혼합분말진행료선택성격광소결공예실험연구，급출료염/PS분말조분급공예삼수대소결성형수축솔적영향규률，미관형태관찰표명，격광소결사득PS분말용화실현대염분과립적포과병점결성형，병급출료능구실현량호소결성형적재료배비，위염조공예품개성화제조제공료일조가행적공예도경。
Aiming at meeting salt carving crafts’ personalized demands and avoiding disadvantages of long periodic and high-cost die casting methods, this paper proposed a process for fabricating the salt carving crafts by Selective La_ser Sintering( SLS) rapid prototyping, and carried out SLS process experimental studies on salt/PS mixed powder, then the influencing laws of salt/PS powder’s composition and process parameters on the sintering shrinkage were given. The observation of microstructure morphology showed that the salt particles were packed with melting PS powder after sin_tered by laser scanning and the bond of mixed powder could be achieved. Then the materials’ ratio of Salt powder to PS powder that could realize sintering well was given and a practicable process for personalized manufacture of salt carving crafts was suggested.
