CAJ | 학술논문

针对普通泡沫稳定性差的缺点，在表面活性剂中加入纳米 SiO 2从而提高泡沫的稳定性。利用Tracker 全自动界面流变仪测量了复配体系的表面张力和界面扩张模量；利用可视化刻蚀模型，探明了不同驱替方式的剩余油分布状况；利用岩心实验，对比了两种不同泡沫体系岩心驱替效果。结果表明，纳米 SiO 2颗粒与 SDS 复配后，体系的起泡体积有所降低，但是泡沫稳定性明显增强；纳米 SiO 2颗粒加入到 SDS 溶液后对体系的表面张力影响不大，但是界面黏弹性显著增加；微观驱油实验和岩心驱替实验结果表明，复配泡沫体系可以加强对孔道内壁油的挤压、携带作用，提高岩心两端的压差，从而增加波及面积，提高采收率。
침대보통포말은정성차적결점，재표면활성제중가입납미 SiO 2종이제고포말적은정성。이용Tracker 전자동계면류변의측량료복배체계적표면장력화계면확장모량；이용가시화각식모형，탐명료불동구체방식적잉여유분포상황；이용암심실험，대비료량충불동포말체계암심구체효과。결과표명，납미 SiO 2과립여 SDS 복배후，체계적기포체적유소강저，단시포말은정성명현증강；납미 SiO 2과립가입도 SDS 용액후대체계적표면장력영향불대，단시계면점탄성현저증가；미관구유실험화암심구체실험결과표명，복배포말체계가이가강대공도내벽유적제압、휴대작용，제고암심량단적압차，종이증가파급면적，제고채수솔。
For the poor stability of general foams,Nano-SiO 2 was added into surfactant solution to increase the stability of foams.The surface tension and surface dilatational properties of the compounded system were measured by Tracker Interfacial Rheometer.The distribution of remaining oil and its oil displacement mechanism at each method of displacement were analyzed by microscopic model.The effect of oil recovery with two different foam systems was also studied by core experiments.It was proved that the increase of surface dilatational modules was the main reason for foam stability which can increase the sweep area and extrusion for oil on the channel wall.The core flooding results showed that both the oil recovery and the pressure drop increased with the SiO 2/SDS foam system.