航天器环境工程
航天器環境工程
항천기배경공정
SPACECRAFT ENVIRONMENT ENGINEERING
2014年
6期
609-613
,共5页
朱学旺%张思箭%宁佐贵%刘青林
硃學旺%張思箭%寧佐貴%劉青林
주학왕%장사전%저좌귀%류청림
3σ准则%疲劳损伤%频域方法%疲劳影响因子%窄带随机模型
3σ準則%疲勞損傷%頻域方法%疲勞影響因子%窄帶隨機模型
3σ준칙%피로손상%빈역방법%피로영향인자%착대수궤모형
3σ clipping rule%fatigue damage%frequency-domain method%fatigue influence factor%narrow-band random model
工程研究中经常要应用3σ准则来实现随机振动过程的时域、频域转换。文章应用疲劳损伤分析的频域方法,讨论了3σ准则的应用对于振动疲劳损伤累积评价结果的影响。应用满足Rayleigh分布的窄带模型及其4种典型的修正方法分析疲劳影响因子,数值模拟结果表明,3σ截断后的疲劳损伤累积仅占全部疲劳损伤累积的约70%(取m=6),与材料疲劳参数m有关,且基于窄带模型的疲劳影响因子分析方法具有一定程度的通用性。
工程研究中經常要應用3σ準則來實現隨機振動過程的時域、頻域轉換。文章應用疲勞損傷分析的頻域方法,討論瞭3σ準則的應用對于振動疲勞損傷纍積評價結果的影響。應用滿足Rayleigh分佈的窄帶模型及其4種典型的脩正方法分析疲勞影響因子,數值模擬結果錶明,3σ截斷後的疲勞損傷纍積僅佔全部疲勞損傷纍積的約70%(取m=6),與材料疲勞參數m有關,且基于窄帶模型的疲勞影響因子分析方法具有一定程度的通用性。
공정연구중경상요응용3σ준칙래실현수궤진동과정적시역、빈역전환。문장응용피로손상분석적빈역방법,토론료3σ준칙적응용대우진동피로손상루적평개결과적영향。응용만족Rayleigh분포적착대모형급기4충전형적수정방법분석피로영향인자,수치모의결과표명,3σ절단후적피로손상루적부점전부피로손상루적적약70%(취m=6),여재료피로삼수m유관,차기우착대모형적피로영향인자분석방법구유일정정도적통용성。
The 3σclipping rule is used in a random vibration process in the time-domain and the frequency-domain. In this paper, the frequency-domain methods for the fatigue damage accumulation analysis are used to evaluate the effects of the 3σclipping rule on the results of fatigue damage accumulation analyses. A narrow-band model described by the Rayleigh distribution and four typical modified approaches is employed to analyze the fatigue influence factors. Numerical simulations show that the fatigue damage accumulation corresponding to the 3σclipped is only about 70%of the total fatigue damages(with material fatigue parameter m=6). The influence factor analysis based on the narrow-band model can be applied approximately for wide-band random processes.