山东冶金
山東冶金
산동야금
SHANDONG METALLURY
2014年
6期
25-26,33
,共3页
姜军%李麦麦%闫亮%曹建民%管延华
薑軍%李麥麥%閆亮%曹建民%管延華
강군%리맥맥%염량%조건민%관연화
高压水除鳞%水压%表面缺陷%氧化铁皮
高壓水除鱗%水壓%錶麵缺陷%氧化鐵皮
고압수제린%수압%표면결함%양화철피
high-pressure water descaling%pressure%surface defects%iron oxide
针对ER50-6E焊接用钢盘条表面质量与高压水除鳞机水压的关系进行实验研究，结果表明：随着高压水除鳞机水压的增大，氧化铁皮的压入等表面缺陷的深度逐渐降低，生产现场“红烟”减轻，生产环境得到明显改善。确定了生产ER50-6E焊接用钢盘时，高压水除鳞机最佳水压为17 MPa左右。
針對ER50-6E銲接用鋼盤條錶麵質量與高壓水除鱗機水壓的關繫進行實驗研究，結果錶明：隨著高壓水除鱗機水壓的增大，氧化鐵皮的壓入等錶麵缺陷的深度逐漸降低，生產現場“紅煙”減輕，生產環境得到明顯改善。確定瞭生產ER50-6E銲接用鋼盤時，高壓水除鱗機最佳水壓為17 MPa左右。
침대ER50-6E한접용강반조표면질량여고압수제린궤수압적관계진행실험연구，결과표명：수착고압수제린궤수압적증대，양화철피적압입등표면결함적심도축점강저，생산현장“홍연”감경，생산배경득도명현개선。학정료생산ER50-6E한접용강반시，고압수제린궤최가수압위17 MPa좌우。
The relationship of the welding rod surface quality of ER50-6E with water pressure of high-pressure descaling machine were studied in this paper. The results indicated that with the increasing of water pressure, the depth of rolled-in scale and other surface defects decreased, and the red smoke of production site can be reduced. The production environment has been significantly improved. The optimal pressure of high-pressure water descaling is determined about 17 MPa, when the ER50-6E welding steel plate to be produced.
