CAJ | 학술논문

以大钩叶藤材为研究对象，测得其基本密度值为0．3021 g／cm3，抗压强度值为16．92 MPa，抗弯弹性模量和抗弯强度分别为124．43 MPa和20．46 MPa。并将其与玛瑙省藤材进行比较，以期为大钩叶藤材商业化利用提供基础数据。结果表明，大钩叶藤材的材性较差，直接应用不能满足商业化利用的要求，需对其进行改性研究。
이대구협등재위연구대상，측득기기본밀도치위0．3021 g／cm3，항압강도치위16．92 MPa，항만탄성모량화항만강도분별위124．43 MPa화20．46 MPa。병장기여마노성등재진행비교，이기위대구협등재상업화이용제공기출수거。결과표명，대구협등재적재성교차，직접응용불능만족상업화이용적요구，수대기진행개성연구。
With Plectocomia assamica Grift, we determined the value of basic density of 0.302 1 g/cm3 , the compressive strength of 16.92 MPa, the bending modulus and bending strength of 124.43 and 20.46 MPa, respectively.All these properties were compared with Calamus manan, we provided an effective way for commercial utilization of P.assamica.The properties of P.assamica material are poor , and direct application cannot meet the commercial utilization requirements , so P.assamica needs modification .