电子元件与材料
電子元件與材料
전자원건여재료
ELECTRONIC COMPONENTS & MATERIALS
2015年
1期
69-72
,共4页
超宽带%陷波特性%准自补天线%U形槽%印刷天线%无线局域网
超寬帶%陷波特性%準自補天線%U形槽%印刷天線%無線跼域網
초관대%함파특성%준자보천선%U형조%인쇄천선%무선국역망
ultra-wideband (UWB)%band-notched characteristic%quasi-self-complementary antenna%U-shaped slot%printed antenna%WLAN
提出一种新型的微带馈电准自补天线,其辐射贴片由矩形和扇形金属片构成,并在地板上刻与辐射元互补的缝,天线整体尺寸为25 mm×32 mm×1 mm,为进一步展宽带宽,在馈电点下方的地板上挖去一个矩形缺口。仿真结果表明:驻波比小于2的带宽覆盖3.04~11.00 GHz,在整个工作频段有良好的辐射方向图。通过在馈线上嵌入U型槽,实现了对WLAN频段的陷波,而通带内仍可保持稳定的增益。
提齣一種新型的微帶饋電準自補天線,其輻射貼片由矩形和扇形金屬片構成,併在地闆上刻與輻射元互補的縫,天線整體呎吋為25 mm×32 mm×1 mm,為進一步展寬帶寬,在饋電點下方的地闆上挖去一箇矩形缺口。倣真結果錶明:駐波比小于2的帶寬覆蓋3.04~11.00 GHz,在整箇工作頻段有良好的輻射方嚮圖。通過在饋線上嵌入U型槽,實現瞭對WLAN頻段的陷波,而通帶內仍可保持穩定的增益。
제출일충신형적미대궤전준자보천선,기복사첩편유구형화선형금속편구성,병재지판상각여복사원호보적봉,천선정체척촌위25 mm×32 mm×1 mm,위진일보전관대관,재궤전점하방적지판상알거일개구형결구。방진결과표명:주파비소우2적대관복개3.04~11.00 GHz,재정개공작빈단유량호적복사방향도。통과재궤선상감입U형조,실현료대WLAN빈단적함파,이통대내잉가보지은정적증익。
A novel microstrip-fed quasi-self-complementary antenna was proposed. This antenna with overall size of 25 mm×32 mm×1 mm consists of a rectangular and a fan-shaped radiating metal patches, and its counterpart slot was etched on the other side of the dielectric substrate. In order to broaden bandwidth, there was a rectangular notch on the ground plane. The results of simulation show that the VSWR is less than 2 over the frequency range of 3.04-11.00 GHz. The antenna exhibits very stable radiation patterns over the entire operating bandwidth. An U-shaped slot is embedded into the feed line to obtain the band-notched characteristic in the frequency band of WLAN, meanwhile the gain of the band-notched antenna is stable in pass band.