航天制造技术
航天製造技術
항천제조기술
HANGTIAN ZHIXAO JI SHU
2014年
6期
44-47
,共4页
刘连军%张余升%唐春英%王伟锋
劉連軍%張餘升%唐春英%王偉鋒
류련군%장여승%당춘영%왕위봉
蜂窝板%制孔%切削参数%加工效率
蜂窩闆%製孔%切削參數%加工效率
봉와판%제공%절삭삼수%가공효솔
honeycomb board%drill hole%cutting parameters%processing efficiency
从钻孔方式、切削参数、刀具选用等方面对蜂窝板制孔加工进行研究，并在数控机床上进行实验验证。通过对切削温度、埋件鼓出量、加工效率三方面进行考量，最终找出蜂窝板制孔最优的加工方式。
從鑽孔方式、切削參數、刀具選用等方麵對蜂窩闆製孔加工進行研究，併在數控機床上進行實驗驗證。通過對切削溫度、埋件鼓齣量、加工效率三方麵進行攷量，最終找齣蜂窩闆製孔最優的加工方式。
종찬공방식、절삭삼수、도구선용등방면대봉와판제공가공진행연구，병재수공궤상상진행실험험증。통과대절삭온도、매건고출량、가공효솔삼방면진행고량，최종조출봉와판제공최우적가공방식。
Drilling holes on embedded parts of honeycomb board is researched from several aspects, such as drilling methods, cutting parameters, tool selection and so on. Experiments are carried out on the numerical control machine tool on consideration of the cutting temperature, the amount of bulge of embedded parts and the production efficiency. The optimal method for drilling holes on embedded parts of honeycomb board was finally found out.
