中国有色金属学报(英文版)
中國有色金屬學報(英文版)
중국유색금속학보(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2014年
12期
3792-3796
,共5页
王庆峰%杜文博%刘轲%王朝辉%李淑波
王慶峰%杜文博%劉軻%王朝輝%李淑波
왕경봉%두문박%류가%왕조휘%리숙파
Mg-Zn-Er合金%第二相%微观组织%力学性能
Mg-Zn-Er閤金%第二相%微觀組織%力學性能
Mg-Zn-Er합금%제이상%미관조직%역학성능
Mg-Zn-Er alloy%secondary phase%microstructure%mechanical properties
采用XRD和SEM等微观表征技术研究不同Zn添加量对Mg?2Er合金微观组织和力学性能的影响。结果表明:当Zn添加量为1%和2%时,合金主要相组成为W相和α-Mg;当Zn添加量为4%~10%时,合金中则有I相析出,合金相成分变为W相、I相和α-Mg;当Zn添加量增加至12%时,W相消失,合金中主要第二相则为I相和Mg4Zn7相。当Zn添加量为6%时,合金具有较好的拉伸力学性能,其抗拉强度、屈服强度和伸长率分别为224 MPa、134 MPa和10.4%。
採用XRD和SEM等微觀錶徵技術研究不同Zn添加量對Mg?2Er閤金微觀組織和力學性能的影響。結果錶明:噹Zn添加量為1%和2%時,閤金主要相組成為W相和α-Mg;噹Zn添加量為4%~10%時,閤金中則有I相析齣,閤金相成分變為W相、I相和α-Mg;噹Zn添加量增加至12%時,W相消失,閤金中主要第二相則為I相和Mg4Zn7相。噹Zn添加量為6%時,閤金具有較好的拉伸力學性能,其抗拉彊度、屈服彊度和伸長率分彆為224 MPa、134 MPa和10.4%。
채용XRD화SEM등미관표정기술연구불동Zn첨가량대Mg?2Er합금미관조직화역학성능적영향。결과표명:당Zn첨가량위1%화2%시,합금주요상조성위W상화α-Mg;당Zn첨가량위4%~10%시,합금중칙유I상석출,합금상성분변위W상、I상화α-Mg;당Zn첨가량증가지12%시,W상소실,합금중주요제이상칙위I상화Mg4Zn7상。당Zn첨가량위6%시,합금구유교호적랍신역학성능,기항랍강도、굴복강도화신장솔분별위224 MPa、134 MPa화10.4%。
The effect of Zn addition on microstructure and mechanical properties of the Mg?2Er alloy was investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). The results show that the alloys with 1%and 2%Zn (mass fraction) are composed of the W-phase and theα-Mg matrix. Meanwhile, the addition of 4%?10%Zn results in the formation of the I-phase, the W-phase and theα-Mg matrix. When the addition of Zn reaches 12%, the W-phase disappears and the phase constituents of the alloys mainly include the I-phase and the Mg4Zn7 phase besides theα-Mg solid solution. The alloy containing 6%Zn has better mechanical properties, of which the ultimate tensile strength (UTS) and the yield tensile strength (YTS) are about 224 MPa and 134 MPa, respectively, companying an elongation of 10.4%.