CAJ | 학술논문

针对现有构件通信技术的灵活性低、通用性差以及修改复杂度高等问题，提出一种以参数配置进行构件通信的方式。首先采用软件总线模型建立构件组装平台，然后在总线平台上建立参数共享池、事件共享池等管理对象，最后采用配置参数对象和反射机理实现构件通信技术。结果表明，提出的构件通信技术的灵活性和通用性明显优于其他构件通信技术。基于反射机理的构件组装通信技术在构件组装过程中不需要修改接口代码，不但提高了软件开发的效率而且可以提高软件系统的稳定性。
침대현유구건통신기술적령활성저、통용성차이급수개복잡도고등문제，제출일충이삼수배치진행구건통신적방식。수선채용연건총선모형건립구건조장평태，연후재총선평태상건립삼수공향지、사건공향지등관리대상，최후채용배치삼수대상화반사궤리실현구건통신기술。결과표명，제출적구건통신기술적령활성화통용성명현우우기타구건통신기술。기우반사궤리적구건조장통신기술재구건조장과정중불수요수개접구대마，불단제고료연건개발적효솔이차가이제고연건계통적은정성。
This paper proposed a new way for component communication based on configuration parameters, aiming at solving such deficiencies of existing component communication technologies as low flexibility, poor versatility, and high complexity modify,etc. At first,a component assembly platform was built up by using the software bus model. Then, a parameter share pool and an event share pool were created on the assembly platform. Finally,component communica-tion technology was realized by using configuration parameters of objects and reflection mechanism. The results showed that the proposed method was obviously better than other counterparts, and it did not need to modify the interface codes in the process of component assembling. This could improve not only the efficiency of software development,but also the stability of software system.