石油化工
石油化工
석유화공
PETROCHEMICAL TECHNOLOGY
2014年
12期
1401-1404
,共4页
沈周峰%王金刚%于鲁强%陈江波%毕福勇%杜亚锋
瀋週峰%王金剛%于魯彊%陳江波%畢福勇%杜亞鋒
침주봉%왕금강%우로강%진강파%필복용%두아봉
聚1-丁烯%1-丁烯%黏度模型
聚1-丁烯%1-丁烯%黏度模型
취1-정희%1-정희%점도모형
polybutylene-1%1-butene%viscosity model
测定了1-丁烯/聚1-丁烯溶液体系在不同的固含率(C,%(w))、温度(t,℃)和剪切速率(γ,s-1)下的黏度(η,Pa·s),并对测定的黏度数据进行拟合.实验结果表明,1-丁烯/聚1-丁烯溶液体系的黏度随温度的升高而降低,随剪切速率的增大而降低,随固含率的增大而增大.在10s-1<γ<500s-、70℃≤t≤130℃、2.5%≤C≤25.0%的条件下,将1-丁烯/聚1-丁烯溶液体系测定的黏度数据经拟合得到恒压黏度模型:η=2.543×10-4y-0.3611×exp[1 625.53/(t+ 273)]×exp(12.76C).该黏度模型的方差齐性检验值为17 314.02、结果可信度值为0、调整相关系数平方为0.946 8,对实验数据拟合较好.
測定瞭1-丁烯/聚1-丁烯溶液體繫在不同的固含率(C,%(w))、溫度(t,℃)和剪切速率(γ,s-1)下的黏度(η,Pa·s),併對測定的黏度數據進行擬閤.實驗結果錶明,1-丁烯/聚1-丁烯溶液體繫的黏度隨溫度的升高而降低,隨剪切速率的增大而降低,隨固含率的增大而增大.在10s-1<γ<500s-、70℃≤t≤130℃、2.5%≤C≤25.0%的條件下,將1-丁烯/聚1-丁烯溶液體繫測定的黏度數據經擬閤得到恆壓黏度模型:η=2.543×10-4y-0.3611×exp[1 625.53/(t+ 273)]×exp(12.76C).該黏度模型的方差齊性檢驗值為17 314.02、結果可信度值為0、調整相關繫數平方為0.946 8,對實驗數據擬閤較好.
측정료1-정희/취1-정희용액체계재불동적고함솔(C,%(w))、온도(t,℃)화전절속솔(γ,s-1)하적점도(η,Pa·s),병대측정적점도수거진행의합.실험결과표명,1-정희/취1-정희용액체계적점도수온도적승고이강저,수전절속솔적증대이강저,수고함솔적증대이증대.재10s-1<γ<500s-、70℃≤t≤130℃、2.5%≤C≤25.0%적조건하,장1-정희/취1-정희용액체계측정적점도수거경의합득도항압점도모형:η=2.543×10-4y-0.3611×exp[1 625.53/(t+ 273)]×exp(12.76C).해점도모형적방차제성검험치위17 314.02、결과가신도치위0、조정상관계수평방위0.946 8,대실험수거의합교호.