中国烟草学报
中國煙草學報
중국연초학보
ACTA TABACARIA SINICA
2014年
6期
34-40
,共7页
黄锋%陈清%王乐%窦家宇%王苏红%李斌
黃鋒%陳清%王樂%竇傢宇%王囌紅%李斌
황봉%진청%왕악%두가우%왕소홍%리빈
片烟%增湿与干燥%动力学%薄层模型
片煙%增濕與榦燥%動力學%薄層模型
편연%증습여간조%동역학%박층모형
tobacco strips%humidifying and drying%dynamics%thin layer-mathematical model
为研究不同温湿度条件下烟叶加工中的水分迁移规律,从水分迁移速率、动力学模型及参数应用性三个部分分析了攀枝花C2F片烟的增湿及干燥特性。结果表明,片烟的增湿和干燥都经历升速段、第一降速段和第二降速段三个阶段的速率变化过程,通过逐步提高湿度的控制方法可以避免冷凝吸湿,增强片烟增湿的均匀性;考察了6种薄层动力学模型,其中以Midilli模型对片烟的吸湿和干燥过程拟合效果最好;结合实际复烤生产中的润叶及复烤水分控制区间,发现动力学参数与区间内水分变化时间有很好规律性,对实际生产具有很好的理论和应用参考性。
為研究不同溫濕度條件下煙葉加工中的水分遷移規律,從水分遷移速率、動力學模型及參數應用性三箇部分分析瞭攀枝花C2F片煙的增濕及榦燥特性。結果錶明,片煙的增濕和榦燥都經歷升速段、第一降速段和第二降速段三箇階段的速率變化過程,通過逐步提高濕度的控製方法可以避免冷凝吸濕,增彊片煙增濕的均勻性;攷察瞭6種薄層動力學模型,其中以Midilli模型對片煙的吸濕和榦燥過程擬閤效果最好;結閤實際複烤生產中的潤葉及複烤水分控製區間,髮現動力學參數與區間內水分變化時間有很好規律性,對實際生產具有很好的理論和應用參攷性。
위연구불동온습도조건하연협가공중적수분천이규률,종수분천이속솔、동역학모형급삼수응용성삼개부분분석료반지화C2F편연적증습급간조특성。결과표명,편연적증습화간조도경력승속단、제일강속단화제이강속단삼개계단적속솔변화과정,통과축보제고습도적공제방법가이피면냉응흡습,증강편연증습적균균성;고찰료6충박층동역학모형,기중이Midilli모형대편연적흡습화간조과정의합효과최호;결합실제복고생산중적윤협급복고수분공제구간,발현동역학삼수여구간내수분변화시간유흔호규률성,대실제생산구유흔호적이론화응용삼고성。
C2F tobacco strips from Panzhihua were investigated on features of humidifying and drying from the perspective of moisture migration rate, dynamic model and parameters application in order to study the law of moisture migration in tobacco strips during processing under different temperature and humidity conditions. Results showed that humidifying and drying of tobacco both experienced a changing process of increasing stage, first decreasing stage and second decreasing stage. According to mechanism analysis it was found that moisture condensation could be avoided and uniformity of tobacco humidifying could be enhanced by increasing humidity gradually. Six thin-layer dynamic models were examined and the model Midilli fit best in both process of humidifying and drying. Dynamic parameters and interval time of moisture change was highly correlated if moisture control of ordering and redrying in the processing was taken into account. Such correlation would render good reference for actual production.