红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2014年
12期
4094-4099
,共6页
马军%张鹰%邸男%聂真威
馬軍%張鷹%邸男%聶真威
마군%장응%저남%섭진위
机器视觉%手眼相机%位姿测量%测量精度
機器視覺%手眼相機%位姿測量%測量精度
궤기시각%수안상궤%위자측량%측량정도
machine vision%hand-eye camera%position-pose measurement%measurement accuracy
从理论和实验上对手眼相机位姿测量精度进行了研究。首先,根据靶标设计形式和P3P算法介绍位姿测量原理。接着,从理论上分析了位置测量精度和姿态测量精度,即靶标沿X轴平移位置测量精度和靶标绕X轴、Y轴、Z轴旋转测量精度。然后,对通常的检测方法进行分析,提出了以产生相对位姿实现六维自由度变化的检测方法,提出用中误差对测量精度进行评价,并具体介绍了检测方法。最后,对手眼相机测量精度进行了实际检测,将实验数据与理论数据进行了对比分析。实验结果表明:距离测量精度最大为25.60 mm,旋转测量精度最大为1.4°,均满足测量精度的要求。
從理論和實驗上對手眼相機位姿測量精度進行瞭研究。首先,根據靶標設計形式和P3P算法介紹位姿測量原理。接著,從理論上分析瞭位置測量精度和姿態測量精度,即靶標沿X軸平移位置測量精度和靶標繞X軸、Y軸、Z軸鏇轉測量精度。然後,對通常的檢測方法進行分析,提齣瞭以產生相對位姿實現六維自由度變化的檢測方法,提齣用中誤差對測量精度進行評價,併具體介紹瞭檢測方法。最後,對手眼相機測量精度進行瞭實際檢測,將實驗數據與理論數據進行瞭對比分析。實驗結果錶明:距離測量精度最大為25.60 mm,鏇轉測量精度最大為1.4°,均滿足測量精度的要求。
종이론화실험상대수안상궤위자측량정도진행료연구。수선,근거파표설계형식화P3P산법개소위자측량원리。접착,종이론상분석료위치측량정도화자태측량정도,즉파표연X축평이위치측량정도화파표요X축、Y축、Z축선전측량정도。연후,대통상적검측방법진행분석,제출료이산생상대위자실현륙유자유도변화적검측방법,제출용중오차대측량정도진행평개,병구체개소료검측방법。최후,대수안상궤측량정도진행료실제검측,장실험수거여이론수거진행료대비분석。실험결과표명:거리측량정도최대위25.60 mm,선전측량정도최대위1.4°,균만족측량정도적요구。
In order to realize position-pose measurement of hand-eye camera, an measurement accuracy test system was established. Firstly, based on the target design forms and P3P algorithm, position-pose measurement principle was presented. Sencondly, the position measurement accuracy and pose measurement accuracy were analyzed in theory, i.e., the translational position measurement accuracy along the X axis of the target and the rotational pose measurement accuracy about the X-axis, Y-axis and Z-axis of the target. Thirdly, the usual test method was presented, a new test way to achieve six degree of freedom by relative position-pose production was proposed. Root mean square error was introduced as an evaluation for measurement accuracy, and the test method was described in detail. Finally, practical test for measurement accuracy of an hand-eye camera was carried out, and the experimental data was compared with the theoretical data. The experimental results indicate that the maximum measurement accuracy for distance is 25.60 mm and the maximum measurement accuracy for rotation is 1.4°. It can satisfy the system requirements for accuracy.