CAJ | 학술논문

为了满足生机电一体化仿人假手的控制需求，提出了基于FPGA的仿人假手电气控制系统设计方案。采用模块化设计思想，由FPGA构成的主控芯片模块便于功能拓展与二次开发；由DSP构成的手指运动控制模块、肌电信号采集模块、电刺激模块、USG接口模块和电池管理模块均可独立工作，与主控芯片模块间通过通用接口连接。系统集成度高，可完全放置于假手内部。应用该控制系统在HIT V代手上进行多指抓取实验，实验结果证明其工作效果良好。
위료만족생궤전일체화방인가수적공제수구，제출료기우FPGA적방인가수전기공제계통설계방안。채용모괴화설계사상，유FPGA구성적주공심편모괴편우공능탁전여이차개발；유DSP구성적수지운동공제모괴、기전신호채집모괴、전자격모괴、USG접구모괴화전지관리모괴균가독립공작，여주공심편모괴간통과통용접구련접。계통집성도고，가완전방치우가수내부。응용해공제계통재HIT V대수상진행다지조취실험，실험결과증명기공작효과량호。
A design scheme of prosthetic hand electrical control system based on FPGA is proposed in order to meet control requirements of biomechatronics prosthetic hand. The modular design is used in the system,main control chip module which is composed of FPGA is used to make the system have the ability of functions expansion and redevelopment;finger movement control module made up of DSP,EMG signal collection module,electrophoto-luminescence module,USG interface module and battery management module can work independently and connect with main control chip module,through universal interface. The system is highly-integrated and can be fully placed inside prosthetic hand. The multi-finger grasping experiments on HIT prosthetic hand V are carried out using the control system,and the experimental results verify its working effect is good .