价值工程
價值工程
개치공정
VALUE ENGINEERING
2015年
4期
295-295,296
,共2页
铝碳微电解%聚合氯化铝%重金属铅去除
鋁碳微電解%聚閤氯化鋁%重金屬鉛去除
려탄미전해%취합록화려%중금속연거제
aluminum-carbon miro-electrolysis%polyaluminum chloride%heavy metal plumbum removing
铝矿粉与副产盐酸生产的聚合氯化铝中重金属杂质和有机杂质往往较多,借鉴铁碳微电解原理,人为投加活性炭,创造铝碳微电解条件,用来去除聚合氯化铝中的重金属和有机杂质。在采用铝碳比1:1,动态操作,停留时间在1小时的控制参数,处理费用约6.67元/吨的条件下,原液铅Pb2+含量23.3ppm,处理后铅Pb2+含量下降到5.8ppm,低于国标10ppm的要求。
鋁礦粉與副產鹽痠生產的聚閤氯化鋁中重金屬雜質和有機雜質往往較多,藉鑒鐵碳微電解原理,人為投加活性炭,創造鋁碳微電解條件,用來去除聚閤氯化鋁中的重金屬和有機雜質。在採用鋁碳比1:1,動態操作,停留時間在1小時的控製參數,處理費用約6.67元/噸的條件下,原液鉛Pb2+含量23.3ppm,處理後鉛Pb2+含量下降到5.8ppm,低于國標10ppm的要求。
려광분여부산염산생산적취합록화려중중금속잡질화유궤잡질왕왕교다,차감철탄미전해원리,인위투가활성탄,창조려탄미전해조건,용래거제취합록화려중적중금속화유궤잡질。재채용려탄비1:1,동태조작,정류시간재1소시적공제삼수,처리비용약6.67원/둔적조건하,원액연Pb2+함량23.3ppm,처리후연Pb2+함량하강도5.8ppm,저우국표10ppm적요구。
The polyaluminum chloride produced by bauxite powder and by-product hydrochloric acid has many heavy metals and organic impurities. Referring to the principles of Fe-C micro-electrolysis, by artificially adding activated carbon and creating AL-C micro-electrolysis condition, the heavy metals and organic impurities of polyaluminum chloride can be removed. Under the condition of using the aluminum carbon ratio 1:1, the dynamic operation, the control parameters with the residence time at 1 hour, and the treatment costs about 6.67 yuan/ton, Pb2+content of polyaluminum chloride decreased from 23.3ppm to 5.8ppm, which is below the GB 10ppm requirements.