CAJ | 학술논문

介绍了一种新型的圆盘剪去毛刺装置的气动控制装置，该装置将压缩空气分别通入去毛刺压辊气缸的两腔，两腔各装一个减压阀。无杆腔的推力和去毛刺装置的重力向下，杆腔的压缩力向上，通过调节各腔减压阀的出口压力，保证去毛刺辊的压靠力在一个较合理的使用范围内；根据来料的不同，通过调节杆腔支路的比例减压阀，自动控制去毛刺压辊的压靠力，并在上位机的画面上显示。该气动控制装置已经成功应用于生产实践。
개소료일충신형적원반전거모자장치적기동공제장치，해장치장압축공기분별통입거모자압곤기항적량강，량강각장일개감압벌。무간강적추력화거모자장치적중력향하，간강적압축력향상，통과조절각강감압벌적출구압력，보증거모자곤적압고력재일개교합리적사용범위내；근거래료적불동，통과조절간강지로적비례감압벌，자동공제거모자압곤적압고력，병재상위궤적화면상현시。해기동공제장치이경성공응용우생산실천。
A new pneumatic control device of deburring device side trimmer is proposed.The compressed air flows into two cavities of the deburring roll cylinder,and two reducing valves are installed on two cavities separately.Thrust force of non-pole cavity and gravity of the deburring device are downward,and pole cavity is putting an upward pressure.It can make sure that pressure of the deburring roll is in a reasonable range,through adjusting outlet pressure of every reducing valve.The deburring roll pressure is controlled automatically according to the different materials,through adjusting proportional reducing valve of pole-cavity,and the pressure is displayed on computer screen.The pneumatic control device is successfully put into production.