工程科学学报
工程科學學報
공정과학학보
Journal of University of Science and Technology Beijing
2015年
2期
150-156
,共7页
炼铁%生物质%球团%直接还原%反应动力学%合成气
煉鐵%生物質%毬糰%直接還原%反應動力學%閤成氣
련철%생물질%구단%직접환원%반응동역학%합성기
ironmaking%biomass%pellets%direct reduction%reaction kinetics%syngas
通过分析生物质合成气气氛下,不同组分复合球团(添加和未添加生物质)的还原速率、还原度、表面微观结构和失重变化规律,对球团中添加生物质的作用机理以及含生物质球团还原过程的限制性环节展开研究.添加生物质的复合球团表面结构比无生物质球团疏松,孔隙率高,有利于后续还原的热质传递,增加产物还原度,降低反应活化能;复合球团的还原以收缩核方式进行,在1123~1323 K温度范围内,界面化学反应是两种球团还原反应的主要控速环节;添加生物质后,有利于界面化学反应的进行,使得球团的还原表观活化能由95.448 kJ·mol-1降低到68.131 kJ·mol-1.
通過分析生物質閤成氣氣氛下,不同組分複閤毬糰(添加和未添加生物質)的還原速率、還原度、錶麵微觀結構和失重變化規律,對毬糰中添加生物質的作用機理以及含生物質毬糰還原過程的限製性環節展開研究.添加生物質的複閤毬糰錶麵結構比無生物質毬糰疏鬆,孔隙率高,有利于後續還原的熱質傳遞,增加產物還原度,降低反應活化能;複閤毬糰的還原以收縮覈方式進行,在1123~1323 K溫度範圍內,界麵化學反應是兩種毬糰還原反應的主要控速環節;添加生物質後,有利于界麵化學反應的進行,使得毬糰的還原錶觀活化能由95.448 kJ·mol-1降低到68.131 kJ·mol-1.
통과분석생물질합성기기분하,불동조분복합구단(첨가화미첨가생물질)적환원속솔、환원도、표면미관결구화실중변화규률,대구단중첨가생물질적작용궤리이급함생물질구단환원과정적한제성배절전개연구.첨가생물질적복합구단표면결구비무생물질구단소송,공극솔고,유리우후속환원적열질전체,증가산물환원도,강저반응활화능;복합구단적환원이수축핵방식진행,재1123~1323 K온도범위내,계면화학반응시량충구단환원반응적주요공속배절;첨가생물질후,유리우계면화학반응적진행,사득구단적환원표관활화능유95.448 kJ·mol-1강저도68.131 kJ·mol-1.
The reduction reaction rate, reduction degree, surface microstructure and weight loss of composite pellets with different components under biomass syngas atmosphere were investigated to illustrate the effects of biomass addition in pellets on the reduction behavior and reaction kinetics. The porosity of pellets with the addition of biomass is higher than that without the addition of biomass, which is favorable to heat and mass transfer of the reduction process, increases the reduction degree of products and decreases the apparent activation energy of reaction. The reduction of pellets was carried out in the manner of a shrinking core model. In the range of 1123 to 1323 K, the rate-controlling mechanism of reduction for these two kinds of pellets is interfacial chemical reaction. The addi-tion of biomass in pellets can improve the interfacial chemical reaction, and thus the apparent activation energy of reaction decreases from 95. 448 kJ·mol-1 to 68. 131 kJ·mol-1 .