锅炉制造
鍋爐製造
과로제조
BOILER MANUFACTURING
2015年
1期
40-45
,共6页
高小春%赵航%罗洪%刘海滨%庄文军
高小春%趙航%囉洪%劉海濱%莊文軍
고소춘%조항%라홍%류해빈%장문군
引风机%增压风机%模型%运行优化
引風機%增壓風機%模型%運行優化
인풍궤%증압풍궤%모형%운행우화
以某厂300MW燃煤机组的脱硫系统为研究对象,基于轴流式风机的运行特性,建立运行特性和电耗模型,运用MATLAB软件编写计算程序,计算负荷为50%工况下,随着增压风机入口静压设定值的改变,在风机的四种投运组合方式下的风机效率、总电功率和单机电功率.结果表明:在负荷为50%的工况下运行时,增压风机的入口静压设定值应小于210 Pa,且设定值越小经济性越好;采用两台引风机并联运行效果最好,一台引风机和一台增压风机串联运行效果次之.
以某廠300MW燃煤機組的脫硫繫統為研究對象,基于軸流式風機的運行特性,建立運行特性和電耗模型,運用MATLAB軟件編寫計算程序,計算負荷為50%工況下,隨著增壓風機入口靜壓設定值的改變,在風機的四種投運組閤方式下的風機效率、總電功率和單機電功率.結果錶明:在負荷為50%的工況下運行時,增壓風機的入口靜壓設定值應小于210 Pa,且設定值越小經濟性越好;採用兩檯引風機併聯運行效果最好,一檯引風機和一檯增壓風機串聯運行效果次之.
이모엄300MW연매궤조적탈류계통위연구대상,기우축류식풍궤적운행특성,건립운행특성화전모모형,운용MATLAB연건편사계산정서,계산부하위50%공황하,수착증압풍궤입구정압설정치적개변,재풍궤적사충투운조합방식하적풍궤효솔、총전공솔화단궤전공솔.결과표명:재부하위50%적공황하운행시,증압풍궤적입구정압설정치응소우210 Pa,차설정치월소경제성월호;채용량태인풍궤병련운행효과최호,일태인풍궤화일태증압풍궤천련운행효과차지.