机械制造与自动化
機械製造與自動化
궤계제조여자동화
JIANGSU MACHINE BUILDING & AUTOMATION
2015年
1期
58-59,75
,共3页
互相关函数%非接触式%输液(气)管%裂损
互相關函數%非接觸式%輸液(氣)管%裂損
호상관함수%비접촉식%수액(기)관%렬손
cross ̄correlation function%non ̄contact%conveying fluid ( gas) pipes%crack place
从信号和信号处理知识入手,介绍了通过使用VISUAL DESIGNERTM软件对由数据采集仪UDAS-1001E-2采集而来的数据进行处理,从而实现非接触式转速的测量,验证了利用互相关原理进行非接触式速度测量的可能性。将所搭建的实验台移植并应用于测定深埋在地下的输液(气)管的裂损位置进行了研究,以避免全线开挖,节省了巨大的工作量,值得普遍推广应用。
從信號和信號處理知識入手,介紹瞭通過使用VISUAL DESIGNERTM軟件對由數據採集儀UDAS-1001E-2採集而來的數據進行處理,從而實現非接觸式轉速的測量,驗證瞭利用互相關原理進行非接觸式速度測量的可能性。將所搭建的實驗檯移植併應用于測定深埋在地下的輸液(氣)管的裂損位置進行瞭研究,以避免全線開挖,節省瞭巨大的工作量,值得普遍推廣應用。
종신호화신호처리지식입수,개소료통과사용VISUAL DESIGNERTM연건대유수거채집의UDAS-1001E-2채집이래적수거진행처리,종이실현비접촉식전속적측량,험증료이용호상관원리진행비접촉식속도측량적가능성。장소탑건적실험태이식병응용우측정심매재지하적수액(기)관적렬손위치진행료연구,이피면전선개알,절성료거대적공작량,치득보편추엄응용。
This thesis begins with the knowledge on the signal and the signal processing and introduces how to process the data col ̄lected from the UDAS by use of the VISUAL DESIGNERTM,thus achieving the non ̄contact velocity measurement. It verifies the pos ̄sibility that the non ̄contact velocity measurement can be realized using the cross ̄correlation theory. It also sets up an experiment platform which can be used to transplant of the conveying fluid( gas) pipes deeply buried underground and applied to the study of its crak place,so that mass digging can be avoided and heavy work can be saved by using this method, so it is worth to be promoted and used widely.