建筑科学与工程学报
建築科學與工程學報
건축과학여공정학보
JOURNAL OF ARCHITECTURE AND CIVIL ENGINEERING
2015年
1期
8-20
,共13页
单自由度结构%地震易损性%弹塑性时程分析%能力谱法%统计分析
單自由度結構%地震易損性%彈塑性時程分析%能力譜法%統計分析
단자유도결구%지진역손성%탄소성시정분석%능력보법%통계분석
SDOF system%seismic vulnerability%elastic-plastic time history analysis%capacity spectrum method%statistical analysis
为进行基于能力谱法的结构地震易损性分析,采用选定的250条地震波对单自由度结构进行了弹塑性时程分析和弹性时程分析,建立了结构弹塑性时程分析最大位移与Pushover分析最大位移比的平均值和变异系数与相关参数的关系式,其中Pushover分析中的需求谱采用的是按相同地震波进行弹性时程分析建立的反应谱;通过Monte‐Carlo方法分析了随机结构参数下Pushover分析得到的最大位移的概率特性,给出了最大位移平均值和变异系数的表达式;采用可靠度计算理论,给出了结构易损概率的计算公式和可靠指标的简化计算公式。结果表明:提出的易损性分析方法通过Pushover分析实现了传统结构易损性分析方法需要进行大量弹塑性时程计算才能达到的目标。
為進行基于能力譜法的結構地震易損性分析,採用選定的250條地震波對單自由度結構進行瞭彈塑性時程分析和彈性時程分析,建立瞭結構彈塑性時程分析最大位移與Pushover分析最大位移比的平均值和變異繫數與相關參數的關繫式,其中Pushover分析中的需求譜採用的是按相同地震波進行彈性時程分析建立的反應譜;通過Monte‐Carlo方法分析瞭隨機結構參數下Pushover分析得到的最大位移的概率特性,給齣瞭最大位移平均值和變異繫數的錶達式;採用可靠度計算理論,給齣瞭結構易損概率的計算公式和可靠指標的簡化計算公式。結果錶明:提齣的易損性分析方法通過Pushover分析實現瞭傳統結構易損性分析方法需要進行大量彈塑性時程計算纔能達到的目標。
위진행기우능력보법적결구지진역손성분석,채용선정적250조지진파대단자유도결구진행료탄소성시정분석화탄성시정분석,건립료결구탄소성시정분석최대위이여Pushover분석최대위이비적평균치화변이계수여상관삼수적관계식,기중Pushover분석중적수구보채용적시안상동지진파진행탄성시정분석건립적반응보;통과Monte‐Carlo방법분석료수궤결구삼수하Pushover분석득도적최대위이적개솔특성,급출료최대위이평균치화변이계수적표체식;채용가고도계산이론,급출료결구역손개솔적계산공식화가고지표적간화계산공식。결과표명:제출적역손성분석방법통과Pushover분석실현료전통결구역손성분석방법수요진행대량탄소성시정계산재능체도적목표。
In order to analyse the structural seismic vulnerability based on capacity spectrum method ,elastic‐plastic and elastic time history analysis under 250 selected seismic wave records were made for structure of single degree of freedom (SDOF) systems .Pushover analysis ,whose respond spectrum was generated by the elastic‐plastic time‐history analysis under the same seismic wave records ,was carried out .The relationship among the mean and variation coefficient of ratio of maximum displacement from elastic analysis to Pushover analysis with the relevant parameters were set .The probabilistic characteristic of the maximum displacement obtained from Pushover analysis of stochastic structures were generated by Monte‐Carlo method according to the probability distribution of structural parameters . Based on the reliability theory , the expressions for calculating the vulnerability probability and reliability index were presented .The proposed method for vulnerability analysis can conceivably substitute the time‐consuming process of traditional time‐history method by Pushover analysis .